Centro / Instituto vinculado a la Universidad de Navarra
Asociación Centro Tecnológico Ceit (CEIT)
Publicaciones (22) Publicaciones en las que ha participado algún/a investigador/a
1998
-
Analysis of sharp angular notches in anisotropic materials
International Journal of Fracture, Vol. 93, Núm. 1-4, pp. 373-386
-
Analysis of sharp angular notches in anisotropic materials
International Journal of Fracture, Vol. 93, Núm. 1-4, pp. 373-386
-
Dissolved oxygen control and simultaneous estimation of oxygen uptake rate in activated-sludge plants
Water Environment Research, Vol. 70, Núm. 3, pp. 316-322
-
Effect of temperature and strain rate on the interfacial sliding stress of a GCMC
ECF 12: FRACTURE FROM DEFECTS, VOLS. I-III
-
Energy absorption in calcium aluminosilicate/SiC glass ceramic matrix composite tensile tests
Materials Science and Technology, Vol. 14, Núm. 9, pp. 974-979
-
Estudio de la influencia de la microestructura sobre la deformabilidad en caliente de un acero inoxidable dúplex
Revista de metalurgia, Vol. 34, Núm. 0, pp. 291-295
-
Fe-Ni-Ti binder phases for TiB2-based cermets: A thermodynamic approach
Scripta Materialia, Vol. 39, Núm. 10, pp. 1395-1400
-
Fracture behaviour and pullout analysis in ceramic matrix composites using modified Rosen's model
Materials Science and Technology, Vol. 14, Núm. 9, pp. 1070-1074
-
Influence of contact loss between workpiece and grinding wheel on the roundness errors in centreless grinding
International Journal of Machine Tools and Manufacture, Vol. 38, Núm. 10-11, pp. 1371-1398
-
Influence of the interface on the energy absorption mechanisms of CMCs
Proceedings of the ASME Turbo Expo
-
Influence of the interface on the energy absorption mechanisms of CMCs
American Society of Mechanical Engineers (Paper)
-
Infrared absorption device for analysis of exhaust gases from moving vehicles
Proceedings of SPIE - The International Society for Optical Engineering
-
Kinked cracks in anisotropic elastic materials
International Journal of Fracture, Vol. 93, Núm. 1-4, pp. 387-407
-
Kinked cracks in anisotropic elastic materials
International Journal of Fracture, Vol. 93, Núm. 1-4, pp. 387-407
-
Location of sources of interior noise in railway carriages
Proceedings of the 23rd International Conference on Noise and Vibration Engineering, ISMA
-
Microstructural and Mechanical Behavior of a Duplex Stainless Steel under Hot Working Conditions
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 29, Núm. 12, pp. 2975-2986
-
Modelling the fracture behaviour of CMCs
ECF 12: FRACTURE FROM DEFECTS, VOLS. I-III
-
Optimum design of multi-body systems - the ODESIM experience
INTERNATIONAL CONFERENCE ON MULTI-BODY DYNAMICS
-
Oxidation resistance and microstructure of the oxide layers for TiB2-based cermets
Journal of Materials Chemistry, Vol. 8, Núm. 8, pp. 1851-1857
-
Selection of operational strategies in activated sludge processes based on optimization algorithms
Water Science and Technology, Vol. 37, Núm. 12, pp. 327-334