Publicacións en colaboración con investigadores/as de Basque Research and Technology Alliance (26)

2024

  1. A CFD-based compartmental modelling approach for long-term dynamic simulation of water resource recovery facilities

    Water Science and Technology, Vol. 90, Núm. 2, pp. 490-509

  2. Building energy performance metamodels for district energy management optimisation platforms

    Energy Conversion and Management: X, Vol. 21

  3. Effects of 3D-printing on the tensile splitting strength of concrete structures

    Case Studies in Construction Materials, Vol. 20

  4. Modeling and design of magnetorheological elastomer isolator system for an active control solution to reduce the vibration transmission in elevator context

    Journal of Intelligent Material Systems and Structures, Vol. 35, Núm. 1, pp. 29-48

2023

  1. A Non-Intrusive Monitoring System on Train Pantographs for the Maintenance of Overhead Contact Lines

    Sensors, Vol. 23, Núm. 18

  2. Analysis and modelling of the dynamic stiffness up to 400 Hz of an air spring with a pipeline connected to a reservoir

    Journal of Sound and Vibration, Vol. 557

  3. Estimation of thermal resistance and capacitance of a concrete wall from in situ measurements: A comparison of steady-state and dynamic models

    Energy and Buildings, Vol. 296

  4. Parametric modelling of 3D printed concrete segmented beams with rebars under bending moments

    Case Studies in Construction Materials, Vol. 18

  5. Reactivity of PVD cathodic arc coated hardmetal tools with Inconel 718: Correlation between diffusion couples and tool wear in drilling tests

    Surface and Coatings Technology, Vol. 471

  6. Wear mechanisms of TiN coated tools during high-speed tapping of GGG50 nodular cast iron

    Wear, Vol. 514-515

  7. Wet joint performance of 3D printed concrete beam segments under flexural loading

    Journal of Building Engineering, Vol. 73

2022

  1. 3D printing effect on the compressive strength of concrete structures

    Construction and Building Materials, Vol. 354

  2. Bonding strength of steel rebars perpendicular to the hardened 3D-printed concrete layers

    Construction and Building Materials, Vol. 340

  3. Different path strategies for directed energy deposition of crossing intersections from stainless steel SS316L-Si

    Journal of Manufacturing Processes, Vol. 84, pp. 953-964

  4. Methods for User Activity Recognition in Exoskeletons

    Biosystems and Biorobotics (Springer Science and Business Media Deutschland GmbH), pp. 487-492

  5. Modular and Flexible On-Ground Test Bench for Aircraft Electromechanical Actuators

    IEEE Aerospace and Electronic Systems Magazine, Vol. 37, Núm. 2, pp. 24-32

  6. On the correction of rail accelerations predicted by numerical track models based on Timoshenko beam theory

    Vehicle System Dynamics, Vol. 60, Núm. 6, pp. 1993-2017

  7. Practical design of an electromagnet for the compression characterization of magnetorheological elastomers

    Smart Materials and Structures, Vol. 31, Núm. 9

  8. Rendering Virtual Inertia in Haptic Interfaces: Analysis and Limitations

    Proceedings - IEEE International Conference on Robotics and Automation

  9. Simulation and validation of the gas flow in close-coupled gas atomisation process: Influence of the inlet gas pressure and the throat width of the supersonic gas nozzle

    Powder Technology, Vol. 407