Publicacións en colaboración con investigadores/as de Royal Institute of Technology (34)

2024

  1. Modeling and design of magnetorheological elastomer isolator system for an active control solution to reduce the vibration transmission in elevator context

    Journal of Intelligent Material Systems and Structures, Vol. 35, Núm. 1, pp. 29-48

2022

  1. A survey on the modelling of air springs–secondary suspension in railway vehicles

    Vehicle System Dynamics, Vol. 60, Núm. 3, pp. 835-864

  2. Effect of lubrication on the mechanical behavior of magnetorheological elastomers in compression mode

    Polymer Testing, Vol. 111

  3. On the correction of rail accelerations predicted by numerical track models based on Timoshenko beam theory

    Vehicle System Dynamics, Vol. 60, Núm. 6, pp. 1993-2017

2020

  1. Model of an elevator system to characterize the influence of the isolator on the vibration transmission

    Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics

2019

  1. Implementation of Timoshenko element local deflection for vertical track modelling

    Vehicle System Dynamics, Vol. 57, Núm. 10, pp. 1421-1444

2018

  1. Distributed support modelling for vertical track dynamic analysis

    Vehicle System Dynamics, Vol. 56, Núm. 4, pp. 529-552

  2. Modelling of the track supports with elements over elastic foundation together with dynamic internal degrees of freedom

    Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics

2013

  1. Effect of the spray cone angle in the spray cooling with R134a

    Experimental Thermal and Fluid Science, Vol. 50, pp. 127-138

  2. Indirect energy flow measurement in magneto-sensitive vibration isolator systems

    Applied Acoustics, Vol. 74, Núm. 4, pp. 575-584

  3. Influence of surface roughness on a spray cooling system with R134a. Part I: Heat transfer measurements

    Experimental Thermal and Fluid Science, Vol. 46, pp. 183-190

  4. Influence of surface roughness on a spray cooling system with R134a. Part II: Film thickness measurements

    Experimental Thermal and Fluid Science, Vol. 48, pp. 73-80

  5. Modelling energy flow through magneto-sensitive vibration isolators

    International Journal of Engineering Science, Vol. 65, pp. 22-39

2012

  1. Direct energy flow measurement in magneto-sensitive vibration isolator systems

    Journal of Sound and Vibration, Vol. 331, Núm. 9, pp. 1994-2006

  2. Influence of carbon black and plasticizers on dynamic properties of isotropic magnetosensitive natural rubber

    Plastics, Rubber and Composites

  3. On the disintegration of fan-shaped liquid sheets

    Atomization and Sprays, Vol. 22, Núm. 9, pp. 733-755

2011

  1. Film thickness and heat transfer measurements in a spray cooling system with R134a

    Journal of Electronic Packaging, Transactions of the ASME, Vol. 133, Núm. 1

2010

  1. An experimental study of magneto-sensitive natural rubber components applied in a vibration isolation system

    CONSTITUTIVE MODELS FOR RUBBER VI

  2. Dynamic characterisation of different magneto-sensitive natural rubbers for application in vibration isolation

    Proceedings of ISMA 2010 - International Conference on Noise and Vibration Engineering, including USD 2010

2009

  1. A Nonlinear rubber material model combining fractional order viscoelasticity and amplitude dependent effects

    Journal of Applied Mechanics, Transactions ASME, Vol. 76, Núm. 1, pp. 1-9