Articles (21) Publicacions en què ha participat algun/a investigador/a

2013

  1. A low-cost photogrammetric methodology to obtain geometrical data of masonry arch bridges

    Journal of Architectural Conservation, Vol. 19, Núm. 3, pp. 246-264

  2. A novel approach to evaluate masonry arch stability on the basis of limit analysis theory and non-destructive geometric characterization

    Automation in Construction, Vol. 31, pp. 140-148

  3. Algebraic model for predicting the hydraulic behaviour of an open self-ventilated electrical machine

    International Review on Modelling and Simulations, Vol. 6, Núm. 5, pp. 1446-1451

  4. An empirical model to predict fresh concrete lateral pressure

    Construction and Building Materials, Vol. 47, pp. 379-388

  5. Bone drilling methodology and tool based on position measurements

    Computer Methods and Programs in Biomedicine, Vol. 112, Núm. 2, pp. 284-292

  6. Computational parametric study of an impinging jet in a cross-flow configuration for electronics cooling applications

    Applied Thermal Engineering, Vol. 52, Núm. 2, pp. 428-438

  7. Development of a rubber component model suitable for being implemented in railway dynamic simulation programs

    Journal of Sound and Vibration, Vol. 332, Núm. 12, pp. 3032-3048

  8. Effect of the spray cone angle in the spray cooling with R134a

    Experimental Thermal and Fluid Science, Vol. 50, pp. 127-138

  9. Flow and heat transfer characteristics in micro and mini communicating pressure driven channel flows by numerical simulations

    International Journal of Heat and Mass Transfer, Vol. 58, Núm. 1-2, pp. 568-577

  10. Fresh concrete lateral pressure decay: Kinetics and factorial design to determine significant parameters

    Engineering Structures, Vol. 52, pp. 114-122

  11. Indirect energy flow measurement in magneto-sensitive vibration isolator systems

    Applied Acoustics, Vol. 74, Núm. 4, pp. 575-584

  12. Influence of surface roughness on a spray cooling system with R134a. Part I: Heat transfer measurements

    Experimental Thermal and Fluid Science, Vol. 46, pp. 183-190

  13. Influence of surface roughness on a spray cooling system with R134a. Part II: Film thickness measurements

    Experimental Thermal and Fluid Science, Vol. 48, pp. 73-80

  14. Insight into differences in nanoindentation properties of bone

    Journal of the Mechanical Behavior of Biomedical Materials, Vol. 18, pp. 90-99

  15. Levantamiento Hidrográfico Aerotransportado: necesidad de combinación de distintas tecnologías

    Mapping, Núm. 161, pp. 20-35

  16. Modelling energy flow through magneto-sensitive vibration isolators

    International Journal of Engineering Science, Vol. 65, pp. 22-39

  17. Monitoring of thread quality when tapping nodular cast iron with TiN-coated HSS cutting taps

    International Journal of Advanced Manufacturing Technology, Vol. 69, Núm. 5-8, pp. 1273-1282

  18. New driving control system with haptic feedback: Design and preliminary validation tests

    Transportation Research Part C: Emerging Technologies, Vol. 33, pp. 22-36

  19. Numerical modelling of the natural ventilation of underground transformer substations

    Applied Thermal Engineering, Vol. 51, Núm. 1-2, pp. 852-863

  20. Practical computational aeroacoustics for complex confined scattering geometries in low mach number flows

    Acta Acustica united with Acustica, Vol. 99, Núm. 1, pp. 130-138