Publicaciones (24) Publicaciones en las que ha participado algún/a investigador/a

2022

  1. 3D printing effect on the compressive strength of concrete structures

    Construction and Building Materials, Vol. 354

  2. A survey on the modelling of air springs–secondary suspension in railway vehicles

    Vehicle System Dynamics, Vol. 60, Núm. 3, pp. 835-864

  3. Adaptive opaque façades and their potential to reduce thermal energy use in residential buildings: A simulation-based evaluation

    Journal of Building Physics, Vol. 45, Núm. 5, pp. 675-720

  4. Additively manufactured lattice structures with controlled transverse isotropy for orthopedic porous implants

    Computers in Biology and Medicine, Vol. 150

  5. Bonding strength of steel rebars perpendicular to the hardened 3D-printed concrete layers

    Construction and Building Materials, Vol. 340

  6. Computational Fluid Dynamics Modeling of Liver Radioembolization: A Review

    CardioVascular and Interventional Radiology, Vol. 45, Núm. 1, pp. 12-20

  7. Computational Study of the Microsphere Concentration in Blood during Radioembolization

    Mathematics, Vol. 10, Núm. 22

  8. Computational study of a novel catheter for liver radioembolization

    International Journal for Numerical Methods in Biomedical Engineering, Vol. 38, Núm. 4

  9. Different path strategies for directed energy deposition of crossing intersections from stainless steel SS316L-Si

    Journal of Manufacturing Processes, Vol. 84, pp. 953-964

  10. Effect of lubrication on the mechanical behavior of magnetorheological elastomers in compression mode

    Polymer Testing, Vol. 111

  11. Experimental study of fibre breakup and shot formation in melt blowing nozzle designs

    Journal of Industrial Textiles, Vol. 51, Núm. 3, pp. 3895S-3922S

  12. Experimental study on the hot-melt adhesive pattern produced by melt blowing nozzle designs

    Journal of Industrial Textiles, Vol. 51, Núm. 3, pp. 3923S-3948S

  13. Gibeleko erradioenbolizazioaren CFD simulazioak: odolaren biskositatearen eragina gibeleko hemodinamikan eta mikroesferen banaketan

    Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 42, pp. 339-348

  14. High-density direct laser deposition (DLD) of CM247LC alloy: microstructure, porosity and cracks

    International Journal of Advanced Manufacturing Technology, Vol. 120, Núm. 11-12, pp. 8063-8074

  15. Mechanical and morphological properties of parietal bone in patients with sagittal craniosynostosis

    Journal of the Mechanical Behavior of Biomedical Materials, Vol. 125

  16. Modular and Flexible On-Ground Test Bench for Aircraft Electromechanical Actuators

    IEEE Aerospace and Electronic Systems Magazine, Vol. 37, Núm. 2, pp. 24-32

  17. Mono- and multi-diameter approaches to predict stratified flow structure by means of CFD simulations in DAF systems

    Journal of Water Process Engineering, Vol. 46

  18. Nozzle Designs in Powder-Based Direct Laser Deposition: A Review

    International Journal of Precision Engineering and Manufacturing, Vol. 23, Núm. 9, pp. 1077-1094

  19. On the correction of rail accelerations predicted by numerical track models based on Timoshenko beam theory

    Vehicle System Dynamics, Vol. 60, Núm. 6, pp. 1993-2017

  20. Porosity, cracks, and mechanical properties of additively manufactured tooling alloys: a review

    Advances in Manufacturing, Vol. 10, Núm. 2, pp. 175-204