(TECNUN) Ingeniería Mecánica y Materiales

2024

1. A 3D printed ultra-short dental implant based on lattice structures and ZIRCONIA/Ca2SiO4 combination

   Journal of the Mechanical Behavior of Biomedical Materials, Vol. 155

2. A CFD-based compartmental modelling approach for long-term dynamic simulation of water resource recovery facilities

   Water Science and Technology, Vol. 90, Núm. 2, pp. 490-509

3. A cell expansion framework for property-based automatic compartmentalization of Computational Fluid Dynamics (CFD) models

   Computer Aided Chemical Engineering, Vol. 53, pp. 3247-3252

4. A numerical model for predicting powder characteristics in LMD considering particle interaction

   Advanced Powder Technology, Vol. 35, Núm. 3

5. An in-depth analysis of the hydrodynamic behaviour of a high-rate lamellar DAF tank by means of CFD simulations

   Applied Water Science, Vol. 14, Núm. 6

6. An intelligent climate monitoring system for hygrothermal virtual measurement in closed buildings using Internet-of-things and artificial hydrocarbon networks

   Heliyon, Vol. 10, Núm. 11

7. Analysis of the axial and transversal stiffness of an air spring suspension of a railway vehicle: mathematical modelling and experiments

   International Journal of Rail Transportation, Vol. 12, Núm. 1, pp. 56-75

8. Bihotz bereziak, arreta berezia

   Elhuyar: zientzia eta teknika, Núm. 355, pp. 68-72

9. Building energy performance metamodels for district energy management optimisation platforms

   Energy Conversion and Management: X, Vol. 21

10. Effects of 3D-printing on the tensile splitting strength of concrete structures

    Case Studies in Construction Materials, Vol. 20

11. Experimental study on the temperature measurement of melt blowing fibers through use of infrared thermography

    Experimental Heat Transfer, Vol. 37, Núm. 5, pp. 462-494

12. Modeling and design of magnetorheological elastomer isolator system for an active control solution to reduce the vibration transmission in elevator context

    Journal of Intelligent Material Systems and Structures, Vol. 35, Núm. 1, pp. 29-48

13. Patient-specific closed-loop model of the fontan circulation: Calibration and validation

    Heliyon, Vol. 10, Núm. 9

14. Powder reusability in Metal Binder Jetting

    Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 238, Núm. 4, pp. 1554-1560

15. Review on Engineering of Bone Scaffolds Using Conventional and Additive Manufacturing Technologies

    3D Printing and Additive Manufacturing, Vol. 11, Núm. 4, pp. 1418-1440

16. Surgical strategy in treatment of metopic synostosis in a single centre experience: technical note and quantitative analysis of the outcomes

    Child's Nervous System

17. Understanding the influence of surgical parameters on craniofacial surgery outcomes: a computational study

    Royal Society Open Science, Vol. 11, Núm. 4