Publicaciones (19) Publicaciones en las que ha participado algún/a investigador/a

2010

  1. An experimental study of magneto-sensitive natural rubber components applied in a vibration isolation system

    CONSTITUTIVE MODELS FOR RUBBER VI

  2. Analysis of the performance reduction of axial fans in close proximity to EMC screens

    2010 11th International Conference on Thermal, Mechanical and Multi-Physics Simulation, and Experiments in Microelectronics and Microsystems, EuroSimE 2010

  3. Dynamic characterisation of different magneto-sensitive natural rubbers for application in vibration isolation

    Proceedings of ISMA 2010 - International Conference on Noise and Vibration Engineering, including USD 2010

  4. Efficacy and feeling of a vibrotactile Frontal Collision Warning implemented in a haptic pedal

    Transportation Research Part F: Traffic Psychology and Behaviour, Vol. 13, Núm. 2, pp. 80-91

  5. Experimental study of the turbulent flow around a single wall-mounted prism obstacle placed in a cross-flow and an impinging jet

    WIT Transactions on Engineering Sciences

  6. Head injuries due to unrestrained objects during frontal collisions

    International Journal of Crashworthiness, Vol. 15, Núm. 1, pp. 39-48

  7. Hydraulic modelling of EMC screens and fans in telecommunication cabinets: A state of the art

    IMAPS Nordic Annual Conference 2010, Proceedings

  8. Identification of tool parallel axis offset through the analysis of the topography of surfaces machined by peripheral milling

    International Journal of Machine Tools and Manufacture, Vol. 50, Núm. 12, pp. 1097-1114

  9. Influence of joint-rigidity on the behaviour of single-layer square plan structures

    Civil-Comp Proceedings

  10. Influence of vibration modes and human operator on the stability of haptic rendering

    IEEE Transactions on Robotics, Vol. 26, Núm. 1, pp. 160-165

  11. Lateral pressure over formwork on large dimension concrete blocks

    Engineering Structures, Vol. 32, Núm. 1, pp. 195-206

  12. Linear spatial instability of viscous flow of a liquid sheet through gas

    Physics of Fluids, Vol. 22, Núm. 7, pp. 1-11

  13. Model for the prediction of heterogeneity bands in the topography of surfaces machined by peripheral milling considering tool runout

    International Journal of Machine Tools and Manufacture, Vol. 50, Núm. 1, pp. 51-64

  14. On the Z-width limitation due to the vibration modes of haptic interfaces

    IEEE/RSJ 2010 International Conference on Intelligent Robots and Systems, IROS 2010 - Conference Proceedings

  15. Overview on 718Plus® assessment within "VITAL" project

    7th International Symposium on Superalloy 718 and Derivatives 2010

  16. Rate of placement discussion for the validation of experimental models of fresh concrete lateral pressure in columns

    Construction and Building Materials, Vol. 24, Núm. 6, pp. 934-945

  17. Selection of heat treatment parameters for a cast,ALLVAC 718Plus® alloy

    7th International Symposium on Superalloy 718 and Derivatives 2010

  18. Shore overloads during shoring removal

    Engineering Structures, Vol. 32, Núm. 11, pp. 3629-3638

  19. Stability Boundary and Transparency for Haptic Rendering

    ADVANCES IN HAPTICS (INTECH EUROPE), pp. 103-125