(TECNUN) Ingeniería Mecánica y Materiales

2010

1. An experimental study of magneto-sensitive natural rubber components applied in a vibration isolation system

   CONSTITUTIVE MODELS FOR RUBBER VI

2. Analysis of the performance reduction of axial fans in close proximity to EMC screens

   2010 11th International Conference on Thermal, Mechanical and Multi-Physics Simulation, and Experiments in Microelectronics and Microsystems, EuroSimE 2010

3. Dynamic characterisation of different magneto-sensitive natural rubbers for application in vibration isolation

   Proceedings of ISMA 2010 - International Conference on Noise and Vibration Engineering, including USD 2010

4. Efficacy and feeling of a vibrotactile Frontal Collision Warning implemented in a haptic pedal

   Transportation Research Part F: Traffic Psychology and Behaviour, Vol. 13, Núm. 2, pp. 80-91

5. Experimental study of the turbulent flow around a single wall-mounted prism obstacle placed in a cross-flow and an impinging jet

   WIT Transactions on Engineering Sciences

6. Head injuries due to unrestrained objects during frontal collisions

   International Journal of Crashworthiness, Vol. 15, Núm. 1, pp. 39-48

7. Hydraulic modelling of EMC screens and fans in telecommunication cabinets: A state of the art

   IMAPS Nordic Annual Conference 2010, Proceedings

8. Identification of tool parallel axis offset through the analysis of the topography of surfaces machined by peripheral milling

   International Journal of Machine Tools and Manufacture, Vol. 50, Núm. 12, pp. 1097-1114

9. Influence of joint-rigidity on the behaviour of single-layer square plan structures

   Civil-Comp Proceedings

10. Influence of vibration modes and human operator on the stability of haptic rendering

    IEEE Transactions on Robotics, Vol. 26, Núm. 1, pp. 160-165

11. Lateral pressure over formwork on large dimension concrete blocks

    Engineering Structures, Vol. 32, Núm. 1, pp. 195-206

12. Linear spatial instability of viscous flow of a liquid sheet through gas

    Physics of Fluids, Vol. 22, Núm. 7, pp. 1-11

13. Model for the prediction of heterogeneity bands in the topography of surfaces machined by peripheral milling considering tool runout

    International Journal of Machine Tools and Manufacture, Vol. 50, Núm. 1, pp. 51-64

14. On the Z-width limitation due to the vibration modes of haptic interfaces

    IEEE/RSJ 2010 International Conference on Intelligent Robots and Systems, IROS 2010 - Conference Proceedings

15. Overview on 718Plus® assessment within "VITAL" project

    7th International Symposium on Superalloy 718 and Derivatives 2010

16. Rate of placement discussion for the validation of experimental models of fresh concrete lateral pressure in columns

    Construction and Building Materials, Vol. 24, Núm. 6, pp. 934-945

17. Selection of heat treatment parameters for a cast,ALLVAC 718Plus® alloy

    7th International Symposium on Superalloy 718 and Derivatives 2010

18. Shore overloads during shoring removal

    Engineering Structures, Vol. 32, Núm. 11, pp. 3629-3638

19. Stability Boundary and Transparency for Haptic Rendering

    ADVANCES IN HAPTICS (INTECH EUROPE), pp. 103-125