Publications (34) Publications in which a researcher has participated

2013

  1. A low-cost photogrammetric methodology to obtain geometrical data of masonry arch bridges

    Journal of Architectural Conservation, Vol. 19, Núm. 3, pp. 246-264

  2. A methodology for the linearization of rubber models subjected to random excitation for frequency domain simulations

    Constitutive Models for Rubber VIII - Proceedings of the 8th European Conference on Constitutive Models for Rubbers, ECCMR 2013

  3. A methodology for the linearization of rubber models subjected to random excitation for frequency domain simulations

    Constitutive Models for Rubber VIII (CRC Press), pp. 595-600

  4. A novel approach to evaluate masonry arch stability on the basis of limit analysis theory and non-destructive geometric characterization

    Automation in Construction, Vol. 31, pp. 140-148

  5. Algebraic model for predicting the hydraulic behaviour of an open self-ventilated electrical machine

    International Review on Modelling and Simulations, Vol. 6, Núm. 5, pp. 1446-1451

  6. An empirical model to predict fresh concrete lateral pressure

    Construction and Building Materials, Vol. 47, pp. 379-388

  7. Bimanual drive-by-wire system with haptic feedback

    HAVE 2013 - 2013 IEEE International Symposium on Haptic Audio-Visual Environments and Games, Proceedings

  8. Bone drilling methodology and tool based on position measurements

    Computer Methods and Programs in Biomedicine, Vol. 112, Núm. 2, pp. 284-292

  9. Computational parametric study of an impinging jet in a cross-flow configuration for electronics cooling applications

    Applied Thermal Engineering, Vol. 52, Núm. 2, pp. 428-438

  10. Constitutive Models for Rubber VIII

    CRC Press, pp. 1-711

  11. Development of a rubber component model suitable for being implemented in railway dynamic simulation programs

    Journal of Sound and Vibration, Vol. 332, Núm. 12, pp. 3032-3048

  12. Effect of the spray cone angle in the spray cooling with R134a

    Experimental Thermal and Fluid Science, Vol. 50, pp. 127-138

  13. Experimental study and simulation of the gas flow in the atomisation chamber during close-coupled gas atomisation

    International Powder Metallurgy Congress and Exhibition, Euro PM 2013

  14. Flow and heat transfer characteristics in micro and mini communicating pressure driven channel flows by numerical simulations

    International Journal of Heat and Mass Transfer, Vol. 58, Núm. 1-2, pp. 568-577

  15. Foreword

    Constitutive Models for Rubber VIII

  16. Foreword

    Constitutive Models for Rubber VIII - Proceedings of the 8th European Conference on Constitutive Models for Rubbers, ECCMR 2013

  17. Fresh concrete lateral pressure decay: Kinetics and factorial design to determine significant parameters

    Engineering Structures, Vol. 52, pp. 114-122

  18. Indirect energy flow measurement in magneto-sensitive vibration isolator systems

    Applied Acoustics, Vol. 74, Núm. 4, pp. 575-584

  19. Influence of surface roughness on a spray cooling system with R134a. Part I: Heat transfer measurements

    Experimental Thermal and Fluid Science, Vol. 46, pp. 183-190

  20. Influence of surface roughness on a spray cooling system with R134a. Part II: Film thickness measurements

    Experimental Thermal and Fluid Science, Vol. 48, pp. 73-80