Publicaciones en las que colabora con Íñigo Adin Marcos (15)

2017

  1. Modeling eddy current brake emissions for electromagnetic compatibility with signaling devices in high-speed railways

    IEEE Transactions on Vehicular Technology, Vol. 66, Núm. 11, pp. 9743-9752

2016

  1. Development of an Advanced Laboratory for ETCS Applications

    Transportation Research Procedia

2014

  1. Design cycle and embedded systems platform applied to Industrial Electronics for an MSc program in Industrial Engineering

    Proceedings of XI Tecnologias Aplicadas a la Ensenanza de la Electronica (Technologies Applied to Electronics Teaching), TAEE 2014

  2. Design cycle and embedded systems platformapplied to Industrial Electronics for an MSc program in Industrial Engineering

    Libro de actas del XI Congreso de tecnologías, aprendizaje y enseñanza de la electrónica, TAEE 2014: 11,12 y 13 de Junio de 2014. Universidad de Deusto. Bilbao

2012

  1. EMC precertification laboratory for railway communication equipment

    Proceedings - 2012 Technologies Applied to Electronics Teaching, TAEE 2012

  2. Energy harvesting technologies for low-power electronics

    Transactions on emerging telecommunications technologies, Vol. 23, Núm. 8, pp. 728-741

2011

  1. A 16-kV HBM RF ESD protection codesign for a 1-mW CMOS direct conversion receiver operating in the 2.4-GHz ISM band

    IEEE Transactions on Microwave Theory and Techniques, Vol. 59, Núm. 9, pp. 2318-2330

  2. HF Antenna design optimization for railway spot signalling systems

    Microwave and Optical Technology Letters, Vol. 53, Núm. 12, pp. 2742-2746

2010

  1. Design for test of a low power multi-standard GPS/GALILEO RF front-end

    ISCAS 2010 - 2010 IEEE International Symposium on Circuits and Systems: Nano-Bio Circuit Fabrics and Systems

  2. Low-frequency noise analysis and minimization in Gilbert-cell-based mixers for direct-conversion (zero-IF) low-power front-ends

    International Journal of Circuit Theory and Applications, Vol. 38, Núm. 2, pp. 123-129

2008

  1. Low frequency noise optimization in gilbert-cell-based mixers for direct 3 conversion (zero-if) receivers

    Microwave and Optical Technology Letters, Vol. 50, Núm. 12, pp. 3128-3131

2007

  1. Low power considerations and design for CMOS VCOs applied for direct conversion receivers at 5GHz

    Proceedings of SPIE - The International Society for Optical Engineering

2006

  1. A fully integrated 26.5 dBm CMOS power amplifier for IEEE 802.11a WLAN standard with on-chip "power inductors"

    IEEE MTT-S International Microwave Symposium Digest

2005

  1. A 3.2-GHz fully integrated low-phase noise CMOS VCO with self-biasing current source for the IEEE 802.11a/hiperLAN WLAN standard

    Proceedings of SPIE - The International Society for Optical Engineering

  2. Verificación de la fiabilidad de un sistema de caracterizació n de varactores integrados para aplicaciones de radiofrecuencia

    IEEE Latin America Transactions