Publicaciones (50) Publicaciones en las que ha participado algún/a investigador/a

2011

  1. A 16-kV HBM RF ESD protection codesign for a 1-mW CMOS direct conversion receiver operating in the 2.4-GHz ISM band

    IEEE Transactions on Microwave Theory and Techniques, Vol. 59, Núm. 9, pp. 2318-2330

  2. A MM-wave configurable vco using MCPW-based tunable inductor in 65-nm CMOS

    IEEE Transactions on Circuits and Systems II: Express Briefs, Vol. 58, Núm. 12, pp. 842-846

  3. A factorial design study to determine the significant parameters of fresh concrete lateral pressure and initial rate of pressure decay

    Construction and Building Materials, Vol. 25, Núm. 4, pp. 1946-1955

  4. A new heuristic approach to solving u-shaped assembly line balancing problems type-1

    WORLD ACADEMY OF SCIENCE, ENGINEERING AND TECHNOLOGY. PROCEEDINGS, Vol. 59, pp. 413-421

  5. Analytical calculation of the flux distribution and demagnetization in spoke interior permanent-magnet machines with non-magnetic shaft

    International Review of Electrical Engineering, Vol. 6, Núm. 3, pp. 1228-1238

  6. Assessing response's bias, quality of predictions, and robustness in multiresponse problems

    Lecture Notes in Electrical Engineering, Vol. 90 LNEE, pp. 445-457

  7. Asymptotically equivalent sequences of matrices and multivariate ARMA processes

    IEEE Transactions on Information Theory, Vol. 57, Núm. 8, pp. 5444-5454

  8. Automatic characterisation of primary, secondary and mixed sludge inflow in terms of the mathematical generalised sludge digester model

    Water Science and Technology, Vol. 64, Núm. 3, pp. 557-567

  9. Beam-column resistance of steel members: A comparative study of AISC LRFD and EC3 approaches

    International Journal of Structural Stability and Dynamics, Vol. 11, Núm. 2, pp. 345-361

  10. Block toeplitz matrices: Asymptotic results and applications

    Foundations and Trends in Communications and Information Theory, Vol. 8, Núm. 3, pp. 179-257

  11. Comparative structural analyses of masonry bridges: An application to the Cernadela Bridge

    Journal of Cultural Heritage, Vol. 12, Núm. 3, pp. 300-309

  12. Criterios de fallo de la madera bajo carga multiaxial

    ANALES DE LA MECANICA DE LA FRACTURA, pp. 39 - 44

  13. Dependence of the order and crack density of polystyrene opals on volume fraction, humidity and temperature

    Crystal Research and Technology, Vol. 46, Núm. 10, pp. 1044-1050

  14. Design model for fully integrated high-performance linear CMOS power amplifiers

    IET Microwaves, Antennas and Propagation, Vol. 5, Núm. 7, pp. 795-803

  15. Development of a wireless PlugandLean system for improving manufacturing equipment diagnosis

    International Journal of Computer Integrated Manufacturing, Vol. 24, Núm. 4, pp. 338-351

  16. Diffusional Monte Carlo model of liquid-phase sintering

    Mathematics and Computers in Simulation, Vol. 81, Núm. 11, pp. 2564-2580

  17. Do elementary flux modes combine linearly at the "atomic" level? Integrating tracer-based metabolomics data and elementary flux modes

    BioSystems, Vol. 105, Núm. 2, pp. 140-146

  18. Elastic flexural buckling of non-uniform members: Closed-form expression and equivalent load approach

    Journal of Constructional Steel Research, Vol. 67, Núm. 7, pp. 1078-1085

  19. Encuesta de sostenibilidad de sistemas de mejora continua: comparativa de dos comunidades industriales de España y México

    Intangible Capital, Vol. 7, Núm. 1, pp. 143-169

  20. Experimental and analytical studies on the rotational stiffness of joints for single-layer structures

    Engineering Structures, Vol. 33, Núm. 3, pp. 731-737