Pontificia Universidad Católica de Valparaíso-ko ikertzaileekin lankidetzan egindako argitalpenak (30)

2023

  1. CONNECTIONS TESTING AND RELIABILITY ASSESSMENT OF TIMBER CONNECTIONS WITH DOWEL-TYPE FASTENERS.

    13th World Conference on Timber Engineering, WCTE 2023

  2. Polyethylene with MoS2 nanoparticles toward antibacterial active packaging

    Journal of Applied Polymer Science, Vol. 140, Núm. 3

2022

  1. Computational study of a novel catheter for liver radioembolization

    International Journal for Numerical Methods in Biomedical Engineering, Vol. 38, Núm. 4

2021

  1. A proof-of-concept study of the in-vivo validation of a computational fluid dynamics model of personalized radioembolization

    Scientific Reports, Vol. 11, Núm. 1

  2. Cfd simulations of radioembolization: A proof-of-concept study on the impact of the hepatic artery tree truncation

    Mathematics, Vol. 9, Núm. 8

  3. Gestión del riesgo de incendio en Hispanoamérica: reformas urbanísticas, medidas normativas y circulación de saberes (siglos XV-XIX)

    Memorias: revista digital de historia y arqueología desde El Caribe, Núm. 45

2020

  1. Coercivity and magnetic anisotropy of (Fe0.76 si0.09 b0.10 p0.05)97.5 nb2.0 cu0.5 amorphous and nanocrystalline alloy produced by gas atomization process

    Nanomaterials, Vol. 10, Núm. 5

  2. Effect of hot pressing and hot isostatic pressing on the microstructure, hardness, and wear behavior of nickel

    Materials Letters, Vol. 273

  3. Novel Fe-based amorphous and nanocrystalline powder cores for high-frequency power conversion

    Journal of Magnetism and Magnetic Materials, Vol. 501

  4. On the importance of spiral-flow inflow boundary conditions when using idealized artery geometries in the analysis of liver radioembolization: A parametric study

    International Journal for Numerical Methods in Biomedical Engineering, Vol. 36, Núm. 6

2019

  1. A comparative energy and economic analysis between a low enthalpy geothermal design and gas, diesel and biomass technologies for a HVAC system installed in an office building

    Energies, Vol. 12, Núm. 5

  2. Effect of composition and particle size on the soft magnetic character of Fe-rich amorphous alloys obtained by gas atomization

    Euro PM 2019 Congress and Exhibition

  3. El régimen fiscal de los donativos en las Indias como alternativa a las asambleas estamentarias europeas: Una reinterpretación del imperio (siglos XVI y XVII)

    Mexican Studies - Estudios Mexicanos, Vol. 35, Núm. 3, pp. 300-326

  4. Structural and magnetic properties of amorphous and nanocrystalline Fe–Si–B–P–Nb–Cu alloys produced by gas atomization

    Journal of Alloys and Compounds, Vol. 810

  5. The influence of the elastic modulus on the finite element structural analysis of masonry arches

    Construction and Building Materials, Vol. 221, pp. 614-626

2018

  1. Magnetic properties of annealed amorphous Fe72.5Si12.5B15 Alloy Obtained by Gas Atomization Technique

    IEEE Transactions on Magnetics, Vol. 54, Núm. 11

  2. Soft magnetic amorphous alloys (Fe-rich) obtained by gas atomisation technique

    Journal of Alloys and Compounds, Vol. 735, pp. 2646-2652

2016

  1. Infrastructure management systems based on non-destructive technologies for masonry arch bridges

    Non-Destructive Techniques for the Evaluation of Structures and Infrastructure (CRC Press), pp. 319-336

2014

  1. Influence of geometrical parameters in the downstream flow of a screen under fan-induced swirl conditions

    Engineering Applications of Computational Fluid Mechanics, Vol. 8, Núm. 4, pp. 623-638

  2. Rotating convection in a viscoelastic magnetic fluid

    Journal of Magnetism and Magnetic Materials, Vol. 364, pp. 98-105