Publications by the researcher in collaboration with José Manuel Martínez Esnaola (18)

2024

  1. A microstructure-based constitutive model for eutectoid steels

    Acta Materialia, Vol. 263

2023

  1. A multiscale material model for metallic powder compaction during hot isostatic pressing

    Powder Technology, Vol. 425

  2. Advances in microscale residual stress measurement using focused ion beam milling and digital image correlation

    Revista española de mecánica de la fractura, Núm. 5, pp. 237-242

  3. An elasto-plastic damage-coupled mesoscopic model for cold-drawn eutectoid steels

    Revista española de mecánica de la fractura, Núm. 6, pp. 285-290

2022

  1. A damage model for wire drawing

    Revista española de mecánica de la fractura, Núm. 3, pp. 95-100

  2. Combination of microscale hole-drilling and digital image correlation for local measurement of residual stresses in metallic samples

    Revista española de mecánica de la fractura, Núm. 4, pp. 89-94

2021

  1. Study of Astroloy powder compaction at high temperature under hydrostatic load using finite elements

    Powder Technology, Vol. 381, pp. 92-100

2020

  1. Study of powder densification under hydrostatic loads at high temperatures using finite element method

    Procedia Manufacturing

2017

  1. New mesoscopic constitutive model for deformation of pearlitic steels up to moderate strains

    IOP Conference Series: Materials Science and Engineering

2014

  1. Numerical analysis of the indentation size effect using a strain gradient crystal plasticity model

    Computational Materials Science, Vol. 82, pp. 314-319

  2. Reverse vs. Effective strain in the ring-rolling of superalloy 718

    8th International Symposium on Superalloy 718 and Derivatives 2014

2011

  1. Towards a reliable procedure for the measurement of elastic modulus in instrumented indentation

    Philosophical Magazine, Vol. 91, Núm. 7-9, pp. 1400-1408

2008

  1. Critical examination of strain-rate sensitivity measurement by nanoindentation methods: Application to severely deformed niobium

    Acta Materialia, Vol. 56, Núm. 4, pp. 884-893

  2. On the elastic effects in power-law indentation creep with sharp conical indenters

    Journal of Materials Research, Vol. 23, Núm. 1, pp. 182-188

2006

  1. Comments on "Comment on the determination of mechanical properties from the energy dissipated during indentation" by J. Malzbender [J. Mater. Res. 20, 1090 (2005)]

    Journal of Materials Research

  2. Detailed assessment of indentation size-effect in recrystallized and highly deformed niobium

    Acta Materialia, Vol. 54, Núm. 13, pp. 3445-3452

2005

  1. Absence of one-to-one correspondence between elastoplastic properties and sharp-indentation load-penetration data

    Journal of Materials Research, Vol. 20, Núm. 2, pp. 432-437

  2. Erratum: Absence of one-to-one correspondence between elastoplastic properties and sharp-indentation load-penetration data (Journal of Materials Research (2005) vol. 20 (432))

    Journal of Materials Research