Publicaciones en colaboración con investigadores/as de Centro de Estudios e Investigaciones Técnicas de Gipuzkoa (16)

2020

  1. Plastically-induced volume deformation of nanocrystalline α-Fe with a <110> columnar structure

    Metals, Vol. 10, Núm. 12, pp. 1-10

2016

  1. Characterization of heat affected zones produced by thermal cutting processes by means of Small Punch tests

    Materials Characterization, Vol. 119, pp. 55-64

  2. Definition and validation of Eurocode 3 FAT classes for structural steels containing oxy-fuel, plasma and laser cut holes

    International Journal of Fatigue, Vol. 87, pp. 50-58

  3. Fatigue Behavior of High Strength Steel S890Q Containing Thermally Cut Straight Edges

    Procedia Engineering

  4. Fatigue behaviour of structural steels with oxy-fuel, plasma and laser cut straight edges. Definition of Eurocode 3 FAT classes

    Engineering Structures, Vol. 111, pp. 152-161

  5. Strengthening by intermetallic nanoprecipitation in Fe-Cr-Al-Ti alloy

    Acta Materialia, Vol. 107, pp. 27-37

2015

  1. Coexisting α'-β' nanoscale precipitation in an Fe-Cr-Al-Ti alloy

    PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015

  2. Couple stresses and the fracture of rock

    Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 373, Núm. 2038

  3. Fatigue Performance of Thermally Cut Bolt Holes in Structural Steel S460 M

    Procedia Engineering

2011

  1. Diffusional Monte Carlo model of liquid-phase sintering

    Mathematics and Computers in Simulation, Vol. 81, Núm. 11, pp. 2564-2580

2010

  1. Computer simulation of scaffold degradation

    Journal of Physics: Conference Series

  2. Geometrical Monte Carlo model of liquid-phase sintering

    Mathematics and Computers in Simulation, Vol. 80, Núm. 7, pp. 1469-1486

  3. Size effect in the shear-coupled migration of grain boundaries pinned by triple junctions

    Materials Research Society Symposium Proceedings

2009

  1. Mode II loading behaviour of intergranular cracks lying on a Σ17(530)/[001] symmetrical tilt boundary in copper

    Physica Status Solidi (C) Current Topics in Solid State Physics

2005

  1. Simulation of the microstructural evolution during liquid phase sintering using a geometrical Monte Carlo model

    Modelling and Simulation in Materials Science and Engineering, Vol. 13, Núm. 7, pp. 1057-1070

2002

  1. A mesoscopic plasticity model accounting for spatial fluctuations of plastic strains, internal stresses and dislocation densities

    Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, Vol. 93, Núm. 7, pp. 681-688