José Manuel
Martínez Esnaola
Investigador Principal Senior
Javier
Gil Sevillano
Publicaciones en las que colabora con Javier Gil Sevillano (40)
2024
-
A microstructure-based constitutive model for eutectoid steels
Acta Materialia, Vol. 263
2017
-
New mesoscopic constitutive model for deformation of pearlitic steels up to moderate strains
IOP Conference Series: Materials Science and Engineering
2014
-
Numerical analysis of the indentation size effect using a strain gradient crystal plasticity model
Computational Materials Science, Vol. 82, pp. 314-319
-
Reverse vs. Effective strain in the ring-rolling of superalloy 718
8th International Symposium on Superalloy 718 and Derivatives 2014
2011
-
Diffusional Monte Carlo model of liquid-phase sintering
Mathematics and Computers in Simulation, Vol. 81, Núm. 11, pp. 2564-2580
-
Towards a reliable procedure for the measurement of elastic modulus in instrumented indentation
Philosophical Magazine, Vol. 91, Núm. 7-9, pp. 1400-1408
2010
-
Geometrical Monte Carlo model of liquid-phase sintering
Mathematics and Computers in Simulation, Vol. 80, Núm. 7, pp. 1469-1486
-
Plastic deformation by conservative shear-coupled migration of tilt boundaries with intergranular nano-cracks or precipitates
Philosophical Magazine
-
Size effect in the shear-coupled migration of grain boundaries pinned by triple junctions
Materials Research Society Symposium Proceedings
2009
-
Micromechanical model of 3D cross-ply copper matrix composite reinforced with SiC fibres
Engineering Failure Analysis, Vol. 16, Núm. 8, pp. 2559-2566
-
Mode II loading behaviour of intergranular cracks lying on a Σ17(530)/[001] symmetrical tilt boundary in copper
Physica Status Solidi (C) Current Topics in Solid State Physics
2008
-
Critical examination of strain-rate sensitivity measurement by nanoindentation methods: Application to severely deformed niobium
Acta Materialia, Vol. 56, Núm. 4, pp. 884-893
-
Mode II loading behaviour of intergranular cracks lying on symmetrical tilt boundaries in Cu
Proceedings of 4th International Conference on Multiscale Materials Modeling, MMM 2008
-
On the elastic effects in power-law indentation creep with sharp conical indenters
Journal of Materials Research, Vol. 23, Núm. 1, pp. 182-188
2007
-
Adhesion studies in integrated circuit interconnect structures
Engineering Failure Analysis, Vol. 14, Núm. 2, pp. 349-354
-
Heterogeneous deformation and internal stresses developed in BCC wires by axisymmetric elongation
Materials Science Forum
-
Molecular dynamics simulation of crack tip blunting in opposing directions along a symmetrical tilt grain boundary of copper bicrystal
Fatigue and Fracture of Engineering Materials and Structures, Vol. 30, Núm. 11, pp. 1008-1015
-
Roughness of a mode i in-plane crack front propagating along a heterogeneous cohesive interface
Journal of Computer-Aided Materials Design
2006
-
Adhesion studies in low-k interconnects using cross sectional nanoindentation
AIP Conference Proceedings
-
Atomistic simulation of tensile strength and toughness of cracked Cu nanowires
Fatigue and Fracture of Engineering Materials and Structures, Vol. 29, Núm. 8, pp. 615-622