Publicaciones en colaboración con investigadores/as de Centro de Estudios e Investigaciones Técnicas de Gipuzkoa (79)

2021

  1. Extraction of tool wear indicators in peck-drilling of Inconel 718

    International Journal of Advanced Manufacturing Technology, Vol. 114, Núm. 9-10, pp. 2711-2720

  2. Reactive sintering of WC-Ni-Co-Cr-Ti-Al cemented carbides and precipitation of gamma prime in their metallic binder phases

    International Journal of Refractory Metals and Hard Materials, Vol. 95

2020

  1. An investigation into the effects of HIP after sintering of WC-ZrC-Co-Cr3C2 cemented carbides

    International Journal of Refractory Metals and Hard Materials, Vol. 87

  2. Effect of milling conditions and binder phase content on liquid phase sintering of heat treatable WC-Ni-Co-Cr-Al-Ti cemented carbides

    International Journal of Refractory Metals and Hard Materials, Vol. 88

  3. Sintering of WC hardmetals with Ni-Co-Cr-Ti-Al multi-component alloys

    Euro PM 2018 Congress and Exhibition

2019

  1. Aluminium alloying of the binder phase in WC-Ni-Co-Cr cemented carbides: AlN vs. TiAl3 additions. Effect of solution aging treatments

    Euro PM 2019 Congress and Exhibition

  2. Effect of Cr anc C contents on the sintering window of WC-Fe-Ni-Co-Cr multicomponent alloys

    Euro PM 2019 Congress and Exhibition

  3. Influence of process parameters on the magnetic properties of MIM parts used for aerospace actuation systems

    Euro PM 2019 Congress and Exhibition

  4. Microscale Mechanical Properties Testing and Simulation

    Proceedings - 2018 Nanotechnology for Instrumentation and Measurement, NANOfIM 2018

2018

  1. Comparison of the thermal shock resistance of WC based cemented carbides with Co and Co-Ni-Cr based binders

    International Journal of Refractory Metals and Hard Materials, Vol. 72, pp. 89-96

  2. Liquid phase sintering of (Ti,w)c-ni-co-cr cermets: Microstructure and abrasive wear behavior

    Solid State Phenomena

  3. Sintering of WC hardmetals with Ni-Co-Cr-Ti-Al multi-component alloys

    International Journal of Refractory Metals and Hard Materials, Vol. 77, pp. 44-53

2017

  1. Fatigue testing and properties of hardmetals in the gigacycle range

    International Journal of Refractory Metals and Hard Materials, Vol. 62, pp. 183-191

  2. Presintering of TiCN-TiC-WC-Cr3C2-Ni cermets under N2-H2 atmospheres

    International Journal of Refractory Metals and Hard Materials, Vol. 62, pp. 21-28

  3. Thermal shock resistance of cemented carbides with high binder phase content: Comparison between CO and Co-Ni-Cr based binders

    Proceedings Euro PM 2017: International Powder Metallurgy Congress and Exhibition

2016

  1. Comparison of the damage induced by thermal shock in hardmetals and cermets

    International Journal of Refractory Metals and Hard Materials, Vol. 61, pp. 147-150

  2. Damage induced by thermal shock in hardmetals and cermets

    World PM 2016 Congress and Exhibition

  3. Influence of titanium diboride additions on the sintering behavior of nanoporous fumed silica composites

    Composites Part B: Engineering, Vol. 90, pp. 416-423

2015

  1. Presintering of ticn-Tic-wc-cr3c2-ni cermets under h2 or n2-h2 atmospheres

    Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition

2014

  1. "in-situ" mechanical characterisation of WC-Co hardmetals using microbeam testing

    International Journal of Refractory Metals and Hard Materials, Vol. 43, pp. 236-240