Ángela
Veiga De la Fuente
Investigadora Senior
Shandra
Sáinz Rodríguez
Investigadora Senior
Publicaciones en las que colabora con Shandra Sáinz Rodríguez (18)
2020
-
Effect of low-pressure carburizing and plasma nitriding on mechanical properties and fatigue endurance limits of low alloy sintered steels
Powder Metallurgy, Vol. 63, Núm. 2, pp. 75-79
-
Experimental study of the surface characteristics of electron beam melted Ti-6Al-4V and its improvement
Euro PM 2018 Congress and Exhibition
-
Microstructural development and effect of Cu/Ni/C interactions on dimensional changes and hardenability during sintering of PM steels
Euro PM 2018 Congress and Exhibition
2019
-
Microstructures and mechanical properties of Ti6Al4V parts fabricated by EBM: Effects of manufacturing defects and thermal treatment conditions
Euro PM 2019 Congress and Exhibition
2016
-
Dilatometric analysis of pre-alloyed high hardenability PM steels containing elemental Cu additions
World PM 2016 Congress and Exhibition
-
Enhanced control of dimensional change and mechanical properties of Fe-Cu-C PM steels under optimized sintering cycle
World PM 2016 Congress and Exhibition
-
Low pressure carburizing for steel components subjected to wear: A comparison against plasma nitriding
World PM 2016 Congress and Exhibition
-
Selective laser melting of steels-based metal matrix composites with ceramic reinforcement
World PM 2016 Congress and Exhibition
-
Sintered Mn-containing steels for highperformance applications
International Journal of Powder Metallurgy
2015
-
Controlled shrinkage of low alloy PM steels during LPS
Advances in Powder Metallurgy and Particulate Materials - Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015
-
Improved sintering of Fe-Cu-C PM Steels
Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition
-
Microstructural development and effect of different Cu/C contents on dimensional changes during sintering of PM steels
Powder Metallurgy, Vol. 58, Núm. 5, pp. 328-334
-
Sintered Mn containing steels for high performance applications
Advances in Powder Metallurgy and Particulate Materials - Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015
2014
-
Microstructural development and effect of different Cu/C contents on dimensional changes during sintering of PM steels
Euro PM 2014 Congress and Exhibition, Proceedings
2013
-
Influence of sintering cycle and chemical composition on the amount of martensite obtained after cooling of PM nickel steels
International Powder Metallurgy Congress and Exhibition, Euro PM 2013
2012
-
Lean Cr iron powders for obtaining high performance PM steel grades
Powder Metallurgy, Vol. 55, Núm. 2, pp. 92-94
-
The master alloy concept and its consequences
Advances in Powder Metallurgy and Particulate Materials - 2012, Proceedings of the 2012 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2012
2011
-
Lean cr-containing powders for obtaining high performance PM steel grades
Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2011