Publicaciones (27) Publicaciones de Noemí Pérez Hernández

2023

  1. Chipless Wireless Sensor Coupled With Machine Learning for Oil Temperature Monitoring

    IEEE Sensors Journal, Vol. 23, Núm. 18, pp. 21234-21245

  2. Low-Profile FSS Design Methodology to Increase Isolation between Vehicle-Borne Multifrequency Antennas

    Applied Sciences (Switzerland), Vol. 13, Núm. 7

2022

  1. RFID Gas Sensor for In-field Detection of Chemical Threats: Evaluation of batteryless discontinuous operation

    Proceedings of IEEE Sensors

2020

  1. An enhanced methodology to improve a basic electrical and instrumentation laboratory session

    Proceedings - 2020 14th Technologies Applied to Electronics Teaching Conference, TAEE 2020

2019

  1. Implementation of simultaneous multi-parameter monitoring based in LC-type passive wireless sensing with partial overlapping and decoupling coils

    Sensors (Switzerland), Vol. 19, Núm. 23

  2. Polarization conversion on nanostructured metallic surfaces fabricated by LIPSS

    Proceedings of SPIE - The International Society for Optical Engineering

2017

  1. Metallization and electrical characterization of platinum thin film microelectrodes on biocompatible polydimethylsiloxane substrates for neural implants

    Thin Solid Films, Vol. 636, pp. 438-445

2013

  1. Structural and optical properties of WO 3 sputtered thin films nanostructured by laser interference lithography

    Applied Surface Science, Vol. 276, pp. 229-235

  2. Nanoporous gold periodical linear patterns obtained by laser interference thermal treatment

    Thin Solid Films, Vol. 548, pp. 69-74

  3. Properties of NiO sputtered thin films and modeling of their sensing mechanism under formaldehyde atmospheres

    Acta Materialia, Vol. 61, Núm. 4, pp. 1146-1153

2012

  1. EMC precertification laboratory for railway communication equipment

    Proceedings - 2012 Technologies Applied to Electronics Teaching, TAEE 2012

  2. Enhanced depth control of ultrafast laser micromachining of microchannels in soda-lime glass

    Microelectronic Engineering

  3. Fabrication of high quality sub-micron Au gratings over large areas with pulsed laser interference lithography for SPR sensors

    Optical Materials Express, Vol. 2, Núm. 11, pp. 1571-1579

  4. Fabrication of sub-micrometric metallic hollow-core structures by laser interference lithography

    Applied Surface Science

2011

  1. Dependence of the order and crack density of polystyrene opals on volume fraction, humidity and temperature

    Crystal Research and Technology, Vol. 46, Núm. 10, pp. 1044-1050

  2. Patterning and optical properties of materials at the nanoscale

    Advanced Structured Materials, Vol. 10, pp. 47-68

  3. Periodic patterning of silicon by direct nanosecond laser interference ablation

    Applied Surface Science, Vol. 258, Núm. 3, pp. 1175-1180

  4. Toxic gases detection by NiO sputtered thin films

    Sensor Letters

2009

  1. High-power laser interference lithography process on photoresist: Effect of laser fluence and polarisation

    Applied Surface Science, Vol. 255, Núm. 10, pp. 5537-5541

  2. Interference lithography processes with high-power laser pulses

    Proceedings of SPIE - The International Society for Optical Engineering