Publicaciones en las que colabora con Enrique Castaño Carmona (14)

2025

  1. Experimental findings and 2 dimensional two-temperature model in the multi-pulse ultrafast laser ablation on stainless steel considering the incubation factor

    Optics and Laser Technology, Vol. 180

2024

  1. Fabrication of Thin-Wall Structures with a Femtosecond Laser and Stainless Steel Powder †

    Micromachines, Vol. 15, Núm. 4

2023

  1. Fabrication of Thin-wall Structures with Femtosecond Laser and Stainless Steel Powder

    2023 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2023 - Proceedings

2021

  1. Low temperature NO2gas sensing with ZnO nanostructured by laser interference lithography

    RSC Advances, Vol. 11, Núm. 54, pp. 34144-34151

  2. Study of deposition parameters and growth kinetics of ZnO deposited by aerosol assisted chemical vapor deposition

    RSC Advances, Vol. 11, Núm. 30, pp. 18493-18499

2017

  1. Temperature simulation at ZnO surface processed by laser interference lithography

    Proceedings of SPIE - The International Society for Optical Engineering

2011

  1. Periodic patterning of silicon by direct nanosecond laser interference ablation

    Applied Surface Science, Vol. 258, Núm. 3, pp. 1175-1180

  2. Toxic gases detection by NiO sputtered thin films

    Sensor Letters

2007

  1. Fabrication and characterization of silver inverse opals

    Sensors and Actuators, B: Chemical, Vol. 126, Núm. 1, pp. 86-90

2001

  1. Développement de capteurs CO sélectifs à faible coût basés sur les technologies de microfabrication

    International Gas Research Conference Proceedings

2000

  1. Comparative structural study between sputtered and liquid pyrolysis nanocrystaline SnO2

    Materials Science and Engineering B: Solid-State Materials for Advanced Technology, Vol. 69-70, pp. 406-410

  2. Influence de l'addition de palladium dans les capteurs a SnO2 a film mince pour la detection du methane

    International Gas Union World Gas Conference Papers

1997

  1. A micromachined pressure sensor for biomedical applications

    Journal of Micromechanics and Microengineering, Vol. 7, Núm. 3, pp. 244-246

  2. Optimization of a three-electrode electrochemical etch-stop process

    Sensors and Actuators, A: Physical, Vol. 62, Núm. 1-3, pp. 668-671