Artículos (18) Publicaciones en las que ha participado algún/a investigador/a

2002

  1. A novel geometry for circular series connected multilevel inductors for CMOS RF integrated circuits

    IEEE Transactions on Electron Devices, Vol. 49, Núm. 6, pp. 1084-1086

  2. Biorreactor de membrana termofílico para el tratamiento y reutilización de efluentes de papelera

    Tecnología del agua, Año 22, Núm. 231, pp. 60-65

  3. Built-in active filter for an improved response to carbon monoxide combining thin- and thick-film technologies

    Sensors and Actuators, B: Chemical, Vol. 87, Núm. 1, pp. 88-94

  4. Carbon monoxide detector fabricated on the basis of a tin oxide novel doping method

    IEEE Sensors Journal, Vol. 2, Núm. 4, pp. 322-327

  5. Effect of the via geometry on the Q factor of integrated shunted inductors

    Microwave Engineering Europe, pp. 35-37

  6. Fracture mechanics of Sigma SM1140+ fibre

    Engineering Fracture Mechanics, Vol. 69, Núm. 9, pp. 1007-1013

  7. Hot isostatic pressing of ultrafine tungsten carbide-cobalt hardmetals

    Journal of Materials Science, Vol. 37, Núm. 19, pp. 4189-4195

  8. Improvement of the thermo-mechanical properties of fine grain graphite by doping with different carbides

    Journal of Nuclear Materials, Vol. 307-311, Núm. 2 SUPPL., pp. 1282-1288

  9. Influence of GaN barrier growth temperature on the photoluminescence of InGaN/GaN heterostructures

    Journal of Physics D: Applied Physics, Vol. 35, Núm. 7, pp. 599-603

  10. Integration of multibody systems in mechatronic simulation environments of any kind

    International Journal of Vehicle Design, Vol. 28, Núm. 1-3, pp. 57-67

  11. On the impossibility of multi-pass equal-channel angular drawing

    Scripta Materialia, Vol. 47, Núm. 1, pp. 13-18

  12. Response enhancement at low magnetic fields in magnetoresistive thin film sensors

    Vacuum, Vol. 64, Núm. 3-4, pp. 321-326

  13. Sinter-HIP of α-alumina powders with sub-micron grain sizes

    Journal of the European Ceramic Society, Vol. 22, Núm. 11, pp. 1801-1809

  14. Sintering behaviour and fracture toughness characterization of D2 matrix tool steel, comparison with wrought and PM D2

    Scripta Materialia, Vol. 46, Núm. 5, pp. 369-373

  15. Sintering behaviour and mechanical properties of PM Al-Zn-Mg-Cu alloy containing elemental Mg additions

    Powder Metallurgy, Vol. 45, Núm. 2, pp. 173-180

  16. Stress singularity at the junction of three dissimilar materials

    International Journal of Fracture, Vol. 113, Núm. 4

  17. Swing-up control problem for a self-erecting double inverted pendulum

    IEE Proceedings: Control Theory and Applications, Vol. 149, Núm. 2, pp. 169-175

  18. Telerobotics maintenance of nuclear power plants

    Nuclear Plant Journal, Vol. 20, Núm. 2, pp. 32-36+47