Publicaciones (43) Publicaciones en las que ha participado algún/a investigador/a

2013

  1. Structural and optical properties of WO 3 sputtered thin films nanostructured by laser interference lithography

    Applied Surface Science, Vol. 276, pp. 229-235

  2. A brief summary of the progress on the EFDA tungsten materials program

    Journal of Nuclear Materials, Vol. 442, Núm. 1-3 SUPPL.1

  3. A calculation of the magnetic characteristics of surface mounted pmsms under heavy load conditions considering the cross-magnetizing effect

    International Review of Electrical Engineering, Vol. 8, Núm. 4, pp. 1181-1188

  4. A review of surgical robots for spinal interventions

    International Journal of Medical Robotics and Computer Assisted Surgery, Vol. 9, Núm. 4, pp. 407-422

  5. Add control: Plant virtualization for control solutions in WWTP

    Water Science and Technology, Vol. 68, Núm. 2, pp. 296-302

  6. Algebraic model for predicting the hydraulic behaviour of an open self-ventilated electrical machine

    International Review on Modelling and Simulations, Vol. 6, Núm. 5, pp. 1446-1451

  7. Anaerobic digestion of seven different sewage sludges: A biodegradability and modelling study

    Water Research, Vol. 47, Núm. 16, pp. 6033-6043

  8. Analysis of the stability of high-solids anaerobic digestion of agro-industrial waste and sewage sludge

    Bioresource Technology, Vol. 144, pp. 107-114

  9. Bone drilling methodology and tool based on position measurements

    Computer Methods and Programs in Biomedicine, Vol. 112, Núm. 2, pp. 284-292

  10. Conductometric formaldehyde gas sensors. A review: From conventional films to nanostructured materials

    Thin Solid Films, Vol. 548, pp. 665-676

  11. Coupled electromagnetic and thermal design of miniaturized permanent magnet linear motors for sliding door applications

    International Review of Electrical Engineering, Vol. 8, Núm. 5, pp. 1416-1426

  12. Crack propagation and fracture in silicon wafers under thermal stress

    Journal of Applied Crystallography, Vol. 46, Núm. 4, pp. 849-855

  13. Decision making algorithm for bus passenger simulation during the vehicle design process

    Transport Policy, Vol. 25, pp. 178-185

  14. Determination of recrystallization kinetics from plane strain compression tests

    Materials Science and Engineering A, Vol. 578, pp. 174-180

  15. Development of a decision tree for the integrated operation of nutrient removal MBRs based on simulation studies and expert knowledge

    Chemical Engineering Journal, Vol. 217, pp. 174-184

  16. Development of a rubber component model suitable for being implemented in railway dynamic simulation programs

    Journal of Sound and Vibration, Vol. 332, Núm. 12, pp. 3032-3048

  17. Discussion on the microstructural transients during strain reversal based on the effective equivalent strain concept

    Journal of Materials Science, Vol. 48, Núm. 4, pp. 1480-1491

  18. Effect of sintering atmosphere on densification, mechanical properties and diamond stability of prealloyed diamond impregnated composites obtained by free sintering

    Powder Metallurgy, Vol. 56, Núm. 5, pp. 362-373

  19. Fabrication of broad area optical nanostructures for high throughput chemical sensing

    Sensors and Actuators, B: Chemical, Vol. 187, pp. 356-362

  20. First international comparative study of volatile fatty acids in aqueous samples by chromatographic techniques: Evaluating sources of error

    TrAC - Trends in Analytical Chemistry, Vol. 51, pp. 127-143