Publicaciones en las que colabora con José Manuel Martínez Esnaola (23)

2013

  1. Guidelines for long ultrafine grained steel production and application to the automotive sector

    European Commission

2011

  1. Diffusional Monte Carlo model of liquid-phase sintering

    Mathematics and Computers in Simulation, Vol. 81, Núm. 11, pp. 2564-2580

2010

  1. Geometrical Monte Carlo model of liquid-phase sintering

    Mathematics and Computers in Simulation, Vol. 80, Núm. 7, pp. 1469-1486

  2. Plastic deformation by conservative shear-coupled migration of tilt boundaries with intergranular nano-cracks or precipitates

    Philosophical Magazine

  3. Size effect in the shear-coupled migration of grain boundaries pinned by triple junctions

    Materials Research Society Symposium Proceedings

2009

  1. Mode II loading behaviour of intergranular cracks lying on a Σ17(530)/[001] symmetrical tilt boundary in copper

    Physica Status Solidi (C) Current Topics in Solid State Physics

2008

  1. Mode II loading behaviour of intergranular cracks lying on symmetrical tilt boundaries in Cu

    Proceedings of 4th International Conference on Multiscale Materials Modeling, MMM 2008

2007

  1. Molecular dynamics simulation of crack tip blunting in opposing directions along a symmetrical tilt grain boundary of copper bicrystal

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 30, Núm. 11, pp. 1008-1015

2006

  1. Atomistic simulation of tensile strength and toughness of cracked Cu nanowires

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 29, Núm. 8, pp. 615-622

  2. Deterministic model for ice cream solidification

    Computational Materials Science, Vol. 38, Núm. 1, pp. 9-21

2005

  1. Calculation of nano-crystalline copper toughness using the embedded atom method

    11th International Conference on Fracture 2005, ICF11

  2. Simulation of the microstructural evolution during liquid phase sintering using a geometrical Monte Carlo model

    Modelling and Simulation in Materials Science and Engineering, Vol. 13, Núm. 7, pp. 1057-1070

2004

  1. Simulation of liquid phase sintering using the Monte Carlo method

    Materials Science and Engineering A, Vol. 365, Núm. 1-2, pp. 151-155

1998

  1. Energy absorption in calcium aluminosilicate/SiC glass ceramic matrix composite tensile tests

    Materials Science and Technology, Vol. 14, Núm. 9, pp. 974-979

  2. Fracture behaviour and pullout analysis in ceramic matrix composites using modified Rosen's model

    Materials Science and Technology, Vol. 14, Núm. 9, pp. 1070-1074

  3. Influence of the interface on the energy absorption mechanisms of CMCs

    Proceedings of the ASME Turbo Expo

  4. Influence of the interface on the energy absorption mechanisms of CMCs

    American Society of Mechanical Engineers (Paper)

1997

  1. Damage evolution in a continuous fibre reinforced CMC: measurements and modelling

    Key Engineering Materials, Vol. 127-131, Núm. Pt 2, pp. 1101-1108

  2. Localized stress redistribution after fibre fracture in brittle matrix composites

    Composites Part A: Applied Science and Manufacturing, Vol. 28, Núm. 4, pp. 347-353

  3. Modelling the tensile fracture behaviour of the reinforcing fibre yarns in ceramic matrix composites

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 20, Núm. 5, pp. 703-716