José Manuel Sánchez Moreno-rekin lankidetzan egindako argitalpenak (21)

2014

  1. "in-situ" mechanical characterisation of WC-Co hardmetals using microbeam testing

    International Journal of Refractory Metals and Hard Materials, Vol. 43, pp. 236-240

  2. Micro beam testing: A new method for the mechanical characterization WC-Co hardmetals

    Advances in Tungsten, Refractory and Hardmaterials IX - Proceedings of the 9th International Conference on Tungsten, Refractory and Hardmaterials

2007

  1. Adhesion studies in integrated circuit interconnect structures

    Engineering Failure Analysis, Vol. 14, Núm. 2, pp. 349-354

2006

  1. Adhesion studies in low-k interconnects using cross sectional nanoindentation

    AIP Conference Proceedings

  2. Fracture characterization in patterned thin films by cross-sectional nanoindentation

    Acta Materialia, Vol. 54, Núm. 13, pp. 3453-3462

  3. Simulation of cross-sectional nanoindentation in interconnect structures with cohesive elements

    Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture

2000

  1. Interfacial cracking in thin film structures

    European Structural Integrity Society, Vol. 26, Núm. C, pp. 47-71

1997

  1. Damage evolution in a continuous fibre reinforced CMC: measurements and modelling

    Key Engineering Materials, Vol. 127-131, Núm. Pt 2, pp. 1101-1108

  2. Interfacial micromechanical characterisation of a ceramic matrix composite

    Key Engineering Materials, Vol. 127-131, pp. 599-608

  3. Localized stress redistribution after fibre fracture in brittle matrix composites

    Composites Part A: Applied Science and Manufacturing, Vol. 28, Núm. 4, pp. 347-353

  4. Modelling the tensile fracture behaviour of the reinforcing fibre yarns in ceramic matrix composites

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 20, Núm. 5, pp. 703-716

1996

  1. Interfacial characterization of 2D woven SiC/SiC and cross-ply 0°/90° CAS/SiC composites

    Composites Part A: Applied Science and Manufacturing, Vol. 27, Núm. 9 PART A, pp. 787-792