Publicaciones en las que colabora con José Manuel Martínez Esnaola (21)

2014

  1. "in-situ" mechanical characterisation of WC-Co hardmetals using microbeam testing

    International Journal of Refractory Metals and Hard Materials, Vol. 43, pp. 236-240

  2. Micro beam testing: A new method for the mechanical characterization WC-Co hardmetals

    Advances in Tungsten, Refractory and Hardmaterials IX - Proceedings of the 9th International Conference on Tungsten, Refractory and Hardmaterials

2007

  1. Adhesion studies in integrated circuit interconnect structures

    Engineering Failure Analysis, Vol. 14, Núm. 2, pp. 349-354

2006

  1. Adhesion studies in low-k interconnects using cross sectional nanoindentation

    AIP Conference Proceedings

  2. Fracture characterization in patterned thin films by cross-sectional nanoindentation

    Acta Materialia, Vol. 54, Núm. 13, pp. 3453-3462

  3. Simulation of cross-sectional nanoindentation in interconnect structures with cohesive elements

    Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture

2005

  1. A new technique for the characterization of the adhesion in integrated circuit interconnect structures

    11th International Conference on Fracture 2005, ICF11

  2. A new technique for the characterization of the adhesion in integrated circuit interconnect structures

    Materials Research Society Symposium Proceedings

2003

  1. Characterization of interconnect interfacial adhesion by cross-sectional nanoindentation

    International Journal of Fracture, Vol. 120, Núm. 1-2, pp. 421-429

  2. Interfacial fracture induced by cross-sectional nanoindentation in metal-ceramic thin film structures

    Acta Materialia, Vol. 51, Núm. 14, pp. 4295-4305

2000

  1. Interfacial cracking in thin film structures

    European Structural Integrity Society, Vol. 26, Núm. C, pp. 47-71

1999

  1. Cross-sectional nanoindentation: A new technique for thin film interfacial adhesion characterization

    Acta Materialia, Vol. 47, Núm. 17, pp. 4405-4413

1998

  1. Energy absorption in calcium aluminosilicate/SiC glass ceramic matrix composite tensile tests

    Materials Science and Technology, Vol. 14, Núm. 9, pp. 974-979

  2. Influence of the interface on the energy absorption mechanisms of CMCs

    Proceedings of the ASME Turbo Expo

  3. Influence of the interface on the energy absorption mechanisms of CMCs

    American Society of Mechanical Engineers (Paper)

1997

  1. Damage evolution in a continuous fibre reinforced CMC: measurements and modelling

    Key Engineering Materials, Vol. 127-131, Núm. Pt 2, pp. 1101-1108

  2. Interfacial micromechanical characterisation of a ceramic matrix composite

    Key Engineering Materials, Vol. 127-131, pp. 599-608

  3. Localized stress redistribution after fibre fracture in brittle matrix composites

    Composites Part A: Applied Science and Manufacturing, Vol. 28, Núm. 4, pp. 347-353

  4. Modelling the tensile fracture behaviour of the reinforcing fibre yarns in ceramic matrix composites

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 20, Núm. 5, pp. 703-716

1996

  1. Interfacial characterization of 2D woven SiC/SiC and cross-ply 0°/90° CAS/SiC composites

    Composites Part A: Applied Science and Manufacturing, Vol. 27, Núm. 9 PART A, pp. 787-792