Publications by the researcher in collaboration with Javier Aldazabal (29)

2020

  1. Plastically-induced volume deformation of nanocrystalline α-Fe with a <110> columnar structure

    Metals, Vol. 10, Núm. 12, pp. 1-10

2019

  1. Modelización de la degradación de la resistencia mecánica de estructuras porosas biodegradables

    Anales de mecánica de la fractura, Núm. 36, pp. 292-297

2018

  1. A comparison of the structure and mechanical properties of commercially pure tungsten rolled plates for the target of the European spallation source

    International Journal of Refractory Metals and Hard Materials, Vol. 70, pp. 45-55

  2. Propagación de grietas por fatiga en eslabones de cadenas offshore

    Anales de mecánica de la fractura, Núm. 35, pp. 598-603

2017

  1. Factores de intensidad de tensiones en eslabones de cadenas OFFSHORE

    Anales de mecánica de la fractura, Núm. 34, pp. 447-454

2016

  1. Characterization of heat affected zones produced by thermal cutting processes by means of Small Punch tests

    Materials Characterization, Vol. 119, pp. 55-64

  2. Definition and validation of Eurocode 3 FAT classes for structural steels containing oxy-fuel, plasma and laser cut holes

    International Journal of Fatigue, Vol. 87, pp. 50-58

  3. Fatigue Behavior of High Strength Steel S890Q Containing Thermally Cut Straight Edges

    Procedia Engineering

  4. Fatigue behaviour of structural steels with oxy-fuel, plasma and laser cut straight edges. Definition of Eurocode 3 FAT classes

    Engineering Structures, Vol. 111, pp. 152-161

  5. Strengthening by intermetallic nanoprecipitation in Fe-Cr-Al-Ti alloy

    Acta Materialia, Vol. 107, pp. 27-37

2015

  1. Coexisting α'-β' nanoscale precipitation in an Fe-Cr-Al-Ti alloy

    PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015

  2. Couple stresses and the fracture of rock

    Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 373, Núm. 2038

  3. Experimental measurement of mode I & II critical stress intensity factor of stones.

    Anales de mecánica de la fractura, Núm. 32, pp. 154-159

  4. Fatigue Performance of Thermally Cut Bolt Holes in Structural Steel S460 M

    Procedia Engineering

2013

  1. Guidelines for long ultrafine grained steel production and application to the automotive sector

    European Commission

2011

  1. Diffusional Monte Carlo model of liquid-phase sintering

    Mathematics and Computers in Simulation, Vol. 81, Núm. 11, pp. 2564-2580

2010

  1. Computer simulation of scaffold degradation

    Journal of Physics: Conference Series

  2. Geometrical Monte Carlo model of liquid-phase sintering

    Mathematics and Computers in Simulation, Vol. 80, Núm. 7, pp. 1469-1486

  3. Plastic deformation by conservative shear-coupled migration of tilt boundaries with intergranular nano-cracks or precipitates

    Philosophical Magazine

  4. Size effect in the shear-coupled migration of grain boundaries pinned by triple junctions

    Materials Research Society Symposium Proceedings