Publicaciones en las que colabora con Guillermo Bistue Garcia (15)

2017

  1. Near-field wireless communications and their role in next generation transport infrastructures: An overview of modelling techniques

    Networking Simulation for Intelligent Transportation Systems: High Mobile Wireless Nodes (wiley), pp. 29-50

2011

  1. HF Antenna design optimization for railway spot signalling systems

    Microwave and Optical Technology Letters, Vol. 53, Núm. 12, pp. 2742-2746

  2. Low power RF circuit design in standard CMOS technology

    Lecture Notes in Electrical Engineering, Vol. 104 LNEE, pp. 1-251

2010

  1. Design for test of a low power multi-standard GPS/GALILEO RF front-end

    ISCAS 2010 - 2010 IEEE International Symposium on Circuits and Systems: Nano-Bio Circuit Fabrics and Systems

  2. Low-frequency noise analysis and minimization in Gilbert-cell-based mixers for direct-conversion (zero-IF) low-power front-ends

    International Journal of Circuit Theory and Applications, Vol. 38, Núm. 2, pp. 123-129

2008

  1. Low frequency noise optimization in gilbert-cell-based mixers for direct 3 conversion (zero-if) receivers

    Microwave and Optical Technology Letters, Vol. 50, Núm. 12, pp. 3128-3131

2007

  1. A dual-gain ESD-protected LNA with integrated antenna sensor for a combined GALILEO and GPS front-end

    2007 Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems, SiRF07

2004

  1. A CMOS frequency synthesizer with self-biasing current source for A 5-GHz Wireless LAN receiver

    IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC

2000

  1. A 3 V, 1.6 GHz differential CMOS bandpass amplifier chain for a GPS receiver

    2000 Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems

  2. Room temperature colossal magnetoresistance in nanocrystalline La0.67Sr0.33MnO3 sputtered thin films

    Journal of Magnetism and Magnetic Materials, Vol. 222, Núm. 1-2, pp. 199-206

1997

  1. A design tool for pressure microsensors based on FEM simulations

    Sensors and Actuators, A: Physical, Vol. 62, Núm. 1-3, pp. 591-594

  2. A micromachined pressure sensor for biomedical applications

    Journal of Micromechanics and Microengineering, Vol. 7, Núm. 3, pp. 244-246

  3. Optimization of a three-electrode electrochemical etch-stop process

    Sensors and Actuators, A: Physical, Vol. 62, Núm. 1-3, pp. 668-671