Asociación Centro Tecnológico Ceit (CEIT)

2006

1. ADM1-based methodology for the characterisation of the influent sludge in anaerobic reactors

   Water Science and Technology, Vol. 54, Núm. 4, pp. 157-166

2. An approach to simplify the design of IFFT/FFT cores for OFDM systems

   IEEE Transactions on Consumer Electronics, Vol. 52, Núm. 1, pp. 26-32

3. Atomistic simulation of tensile strength and toughness of cracked Cu nanowires

   Fatigue and Fracture of Engineering Materials and Structures, Vol. 29, Núm. 8, pp. 615-622

4. BaTiO3-CuO sputtered thin film for carbon dioxide detection

   Sensors and Actuators, B: Chemical, Vol. 118, Núm. 1-2, pp. 305-310

5. Controlled undercooling of liquid iron in contact with Al 2O 3 Substrates under varying oxygen partial pressures

   Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, Vol. 37, Núm. 5, pp. 811-821

6. Densification behavior of tungsten heavy alloy based on master sintering curve concept

   Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 37, Núm. 9, pp. 2837-2848

7. Detailed assessment of indentation size-effect in recrystallized and highly deformed niobium

   Acta Materialia, Vol. 54, Núm. 13, pp. 3445-3452

8. Deterministic model for ice cream solidification

   Computational Materials Science, Vol. 38, Núm. 1, pp. 9-21

9. Evaluation of on-line analytic and numeric inverse kinematics approaches driven by partial vision input

   Virtual Reality, Vol. 10, Núm. 1, pp. 48-61

10. Extent of plasma damage to porous organosilicate films characterized with nanoindentation, x-ray reflectivity, and surface acoustic waves

    Journal of Materials Research, Vol. 21, Núm. 12, pp. 3161-3167

11. Fracture characterization in patterned thin films by cross-sectional nanoindentation

    Acta Materialia, Vol. 54, Núm. 13, pp. 3453-3462

12. Grain growth behavior of tungsten heavy alloys based on the master sintering curve concept

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 37, Núm. 11, pp. 3337-3346

13. Influence of multisensory feedback on haptic accessibility tasks

    Virtual Reality, Vol. 10, Núm. 1, pp. 31-40

14. Integración de los simuladores de operación en la explotación de EDAR: aplicación a un caso práctico, la EDAR de Calasparra

    Tecnología del agua, Año 26, Núm. 272, pp. 70-80

15. Massa and charge conservation check in dynamic models: Application to the new ADM1 model

    Water Science and Technology, Vol. 53, Núm. 1, pp. 225-240

16. Mathematical modelling of the anaerobic hybrid reactor

    Water Science and Technology, Vol. 54, Núm. 2, pp. 63-71

17. SU8 protective layers in liquid operating SAWs

    Sensors and Actuators, B: Chemical, Vol. 118, Núm. 1-2, pp. 374-379

18. Supervisory control strategies for the new WWTP of Galindo-Bilbao: The long run from the conceptual design to the full-scale experimental validation

    Water Science and Technology, Vol. 53, Núm. 4-5, pp. 193-201

19. Synthesis and biological evaluation of heteroaryldiamides and heteroaryldiamines as cytotoxic agents, apoptosis inducers and caspase-3 activators

    Archiv der Pharmazie, Vol. 339, Núm. 4, pp. 182-192

20. Thermal behavior of freestanding microstructures fabricated by silicon frontside processing using porous silicon as sacrificial layer

    IEEE Sensors Journal, Vol. 6, Núm. 3, pp. 548-556