Asociación Centro Tecnológico Ceit (CEIT)

2010

1. A comparative study of the porosity of doped graphites by small angle neutron scattering, nitrogen adsorption and helium pycnometry

   Microporous and Mesoporous Materials, Vol. 134, Núm. 1-3, pp. 141-149

2. An Integrated Monte Carlo Methodology for the calibration of water quality models

   Ecological Modelling, Vol. 221, Núm. 22, pp. 2656-2667

3. Comparison of area-efficient FFT algorithms for DVB-T2 receivers

   Electronics Letters, Vol. 46, Núm. 15, pp. 1088-1089

4. Development of a DNA microelectrochemical biosensor for CEACAM5 detection

   IEEE Sensors Journal, Vol. 10, Núm. 8, pp. 1368-1374

5. Dislocation generation related to micro-cracks in Si wafers: High temperature in situ study with white beam X-ray topography

   Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, Vol. 268, Núm. 3-4, pp. 399-402

6. Dislocation sources and slip band nucleation from indents on silicon wafers

   Journal of Applied Crystallography, Vol. 43, Núm. 5 PART 1, pp. 1036-1039

7. Effect of heat treatment of carbon nanofibres on electroless copper deposition

   Composites Science and Technology, Vol. 70, Núm. 16, pp. 2269-2275

8. Effect of the strain reversal on austenite-ferrite phase transformation in a Nb-microalloyed steel

   Materials Science and Engineering A, Vol. 527, Núm. 4-5, pp. 934-940

9. Efficacy and feeling of a vibrotactile Frontal Collision Warning implemented in a haptic pedal

   Transportation Research Part F: Traffic Psychology and Behaviour, Vol. 13, Núm. 2, pp. 80-91

10. Electrolytic removal of chromium rich PVD coatings from hardmetals substrates

    International Journal of Refractory Metals and Hard Materials, Vol. 28, Núm. 2, pp. 155-162

11. Evolución microestructural de composites SiC/aleaciones CuSi obtenidos a través de infiltración reactiva

    Revista de metalurgia, Vol. 46, Núm. 3, pp. 240-248

12. Filtering of high modal frequencies for stable real-time explicit integration of deformable objects using the Finite Element Method

    Progress in Biophysics and Molecular Biology, Vol. 103, Núm. 2-3, pp. 225-235

13. Geometrical Monte Carlo model of liquid-phase sintering

    Mathematics and Computers in Simulation, Vol. 80, Núm. 7, pp. 1469-1486

14. Head injuries due to unrestrained objects during frontal collisions

    International Journal of Crashworthiness, Vol. 15, Núm. 1, pp. 39-48

15. Influence of different aspects of the SOFC anode environment on the oxidation behavior of porous samples made of crofer

    Journal of Fuel Cell Science and Technology, Vol. 7, Núm. 6

16. Influence of thermomechanical processing on the austenite-pearlite transformation in high carbon vanadium microalloyed steels

    ISIJ International, Vol. 50, Núm. 4, pp. 546-555

17. Influence of vibration modes and human operator on the stability of haptic rendering

    IEEE Transactions on Robotics, Vol. 26, Núm. 1, pp. 160-165

18. Knowledge-based system for automatic MBR control

    Water Science and Technology, Vol. 62, Núm. 12, pp. 2829-2836

19. Liquid phase sintering and oxidation resistance of WC-Ni-Co-Cr cemented carbides

    International Journal of Refractory Metals and Hard Materials, Vol. 28, Núm. 4, pp. 516-522

20. Low-frequency noise analysis and minimization in Gilbert-cell-based mixers for direct-conversion (zero-IF) low-power front-ends

    International Journal of Circuit Theory and Applications, Vol. 38, Núm. 2, pp. 123-129