Centro / Instituto vinculado a la Universidad de Navarra
Asociación Centro Tecnológico Ceit (CEIT)
Artikuluak (35) Ikertzaileren baten partaidetza izan duten argitalpenak
2010
-
A comparative study of the porosity of doped graphites by small angle neutron scattering, nitrogen adsorption and helium pycnometry
Microporous and Mesoporous Materials, Vol. 134, Núm. 1-3, pp. 141-149
-
An Integrated Monte Carlo Methodology for the calibration of water quality models
Ecological Modelling, Vol. 221, Núm. 22, pp. 2656-2667
-
Comparison of area-efficient FFT algorithms for DVB-T2 receivers
Electronics Letters, Vol. 46, Núm. 15, pp. 1088-1089
-
Development of a DNA microelectrochemical biosensor for CEACAM5 detection
IEEE Sensors Journal, Vol. 10, Núm. 8, pp. 1368-1374
-
Dislocation generation related to micro-cracks in Si wafers: High temperature in situ study with white beam X-ray topography
Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, Vol. 268, Núm. 3-4, pp. 399-402
-
Dislocation sources and slip band nucleation from indents on silicon wafers
Journal of Applied Crystallography, Vol. 43, Núm. 5 PART 1, pp. 1036-1039
-
Effect of heat treatment of carbon nanofibres on electroless copper deposition
Composites Science and Technology, Vol. 70, Núm. 16, pp. 2269-2275
-
Effect of the strain reversal on austenite-ferrite phase transformation in a Nb-microalloyed steel
Materials Science and Engineering A, Vol. 527, Núm. 4-5, pp. 934-940
-
Efficacy and feeling of a vibrotactile Frontal Collision Warning implemented in a haptic pedal
Transportation Research Part F: Traffic Psychology and Behaviour, Vol. 13, Núm. 2, pp. 80-91
-
Electrolytic removal of chromium rich PVD coatings from hardmetals substrates
International Journal of Refractory Metals and Hard Materials, Vol. 28, Núm. 2, pp. 155-162
-
Evolución microestructural de composites SiC/aleaciones CuSi obtenidos a través de infiltración reactiva
Revista de metalurgia, Vol. 46, Núm. 3, pp. 240-248
-
Filtering of high modal frequencies for stable real-time explicit integration of deformable objects using the Finite Element Method
Progress in Biophysics and Molecular Biology, Vol. 103, Núm. 2-3, pp. 225-235
-
Geometrical Monte Carlo model of liquid-phase sintering
Mathematics and Computers in Simulation, Vol. 80, Núm. 7, pp. 1469-1486
-
Head injuries due to unrestrained objects during frontal collisions
International Journal of Crashworthiness, Vol. 15, Núm. 1, pp. 39-48
-
Influence of different aspects of the SOFC anode environment on the oxidation behavior of porous samples made of crofer
Journal of Fuel Cell Science and Technology, Vol. 7, Núm. 6
-
Influence of thermomechanical processing on the austenite-pearlite transformation in high carbon vanadium microalloyed steels
ISIJ International, Vol. 50, Núm. 4, pp. 546-555
-
Influence of vibration modes and human operator on the stability of haptic rendering
IEEE Transactions on Robotics, Vol. 26, Núm. 1, pp. 160-165
-
Knowledge-based system for automatic MBR control
Water Science and Technology, Vol. 62, Núm. 12, pp. 2829-2836
-
Liquid phase sintering and oxidation resistance of WC-Ni-Co-Cr cemented carbides
International Journal of Refractory Metals and Hard Materials, Vol. 28, Núm. 4, pp. 516-522
-
Low-frequency noise analysis and minimization in Gilbert-cell-based mixers for direct-conversion (zero-IF) low-power front-ends
International Journal of Circuit Theory and Applications, Vol. 38, Núm. 2, pp. 123-129