Asociación Centro Tecnológico Ceit (CEIT)

2016

1. A methodology for assessing local bifurcated blood vessel shape variations

   Biomedical Physics and Engineering Express, Vol. 2, Núm. 1

2. Advanced tungsten materials for plasma-facing components of DEMO and fusion power plants

   Fusion Engineering and Design, Vol. 109-111, pp. 1046-1052

3. Analysis of Complex Steel Microstructures by High-Resolution EBSD

   JOM, Vol. 68, Núm. 1, pp. 215-223

4. Analysis of the Results of Accelerated Aging Tests in Insulated Gate Bipolar Transistors

   IEEE Transactions on Power Electronics, Vol. 31, Núm. 11, pp. 7953-7962

5. Austenite Static Recrystallization Kinetics in Microalloyed B Steels

   Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 47, Núm. 6, pp. 3150-3164

6. Comparison of the damage induced by thermal shock in hardmetals and cermets

   International Journal of Refractory Metals and Hard Materials, Vol. 61, pp. 147-150

7. Effect of the solidification time on the median particle size of powders produced by water atomisation

   Powder Metallurgy, Vol. 59, Núm. 2, pp. 128-141

8. Electrochemical Real-Time Analysis of Bacterial Biofilm Adhesion and Development by Means of Thin-Film Biosensors

   IEEE Sensors Journal, Vol. 16, Núm. 7, pp. 1856-1864

9. Femtosecond laser fabrication of highly hydrophobic stainless steel surface with hierarchical structures fabricated by combining ordered microstructures and LIPSS

   Applied Surface Science, Vol. 374, pp. 81-89

10. Formaldehyde sensing mechanism of SnO2 nanowires grown on-chip by sputtering techniques

    RSC Advances, Vol. 6, Núm. 22, pp. 18558-18566

11. Formation of a protective alumina layer after sintering for the deceleration of low temperature degradation in alumina-toughened zirconia ceramics

    Ceramics International, Vol. 42, Núm. 14, pp. 16417-16423

12. Fracture strength testing of a self-passivating tungsten alloy at the micrometre scale

    Philosophical Magazine, Vol. 96, Núm. 32-34, pp. 3570-3585

13. Hot deformation and static softening behavior of vanadium microalloyed high manganese austenitic steels

    Materials Science and Engineering A, Vol. 651, pp. 358-369

14. Identification of the degradation state for condition-based maintenance of insulated gate bipolar transistors: A self-organizing map approach

    Microelectronics Reliability, Vol. 60, pp. 48-61

15. Influence of Sandwich-Type Constrained Layer Damper Design Parameters on Damping Strength

    Shock and Vibration, Vol. 2016

16. Influence of titanium diboride additions on the sintering behavior of nanoporous fumed silica composites

    Composites Part B: Engineering, Vol. 90, pp. 416-423

17. Layout-aware design methodology for a 75 GHz power amplifier in a 55 nm SiGe technology

    Integration, the VLSI Journal, Vol. 52, pp. 208-216

18. Manufacturing and testing of self-passivating tungsten alloys of different composition

    Nuclear Materials and Energy, Vol. 9, pp. 422-429

19. Modelling of static recrystallization behavior of high manganese austenitic steels with different alloying contents

    ISIJ International, Vol. 56, Núm. 6, pp. 1038-1047

20. Multimode step-up bidirectional series resonant dc/dc converter using continuous current mode

    IET Power Electronics, Vol. 9, Núm. 4, pp. 710-718