Publicaciones (68) Publicaciones en las que ha participado algún/a investigador/a

2011

  1. A 16-kV HBM RF ESD protection codesign for a 1-mW CMOS direct conversion receiver operating in the 2.4-GHz ISM band

    IEEE Transactions on Microwave Theory and Techniques, Vol. 59, Núm. 9, pp. 2318-2330

  2. A comparison of the effects of multi-wall and single-wall carbon nanotube additions on the properties of zirconia toughened alumina composites

    Carbon, Vol. 49, Núm. 5, pp. 1599-1607

  3. A knowledge-based control system for air-scour optimisation in membrane bioreactors

    Water Science and Technology, Vol. 63, Núm. 9, pp. 2025-2031

  4. AAL for supporting elderly

    2011 IST-Africa Conference Proceedings, IST 2011

  5. ADD CONTROL: Advanced control solutions for waste water treatment

    Reviews in Environmental Science and Biotechnology, Vol. 10, Núm. 1, pp. 3-7

  6. An optimization method for overdetermined kinematic problems formulated with natural coordinates

    Multibody System Dynamics, Vol. 26, Núm. 4, pp. 397-410

  7. Analysis of the frequency band to derive the magnetic Barkhausen noise signal using a configurable and computer-aided system for the simultaneous measurements of magnetic hysteresis loops and Barkhausen noise

    9TH INTERNATIONAL CONFERENCE ON BARKHAUSEN NOISE AND MICROMAGNETIC TESTING

  8. Analytical calculation of the flux distribution and demagnetization in spoke interior permanent-magnet machines with non-magnetic shaft

    International Review of Electrical Engineering, Vol. 6, Núm. 3, pp. 1228-1238

  9. Assessment of the influence of thermal pre-treatment time on the macromolecular composition and anaerobic biodegradability of sewage sludge

    Bioresource Technology, Vol. 102, Núm. 2, pp. 660-666

  10. Automatic characterisation of primary, secondary and mixed sludge inflow in terms of the mathematical generalised sludge digester model

    Water Science and Technology, Vol. 64, Núm. 3, pp. 557-567

  11. Battery response analyzer using a high current DC-DC converter as an electronic load

    Renewable Energy and Power Quality Journal, Vol. 1, Núm. 9, pp. 611-615

  12. CALHIDRA 3.0 - New software application for river water quality prediction based on RWQM1

    Environmental Modelling and Software, Vol. 26, Núm. 7, pp. 973-979

  13. Carbide spheroidization kinetics in a low alloy medium carbon steel: Relevance of deformation after transformation

    Materials Science and Technology Conference and Exhibition 2011, MS and T'11

  14. Carbide spheroidization kinetics in a low-alloy medium-carbon steel: Relevance of deformation after transformation

    AIST Steel Properties and Applications Conference Proceedings - Combined with MS and T'11, Materials Science and Technology 2011

  15. Combined model to describe both the mechanical and microstructural transients under a reversal of strain

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 42, Núm. 9, pp. 2633-2642

  16. Comparative analysis of QCM and SPR techniques for the optimization of immobilization sequences

    Sensors and Actuators, B: Chemical, Vol. 155, Núm. 2, pp. 667-672

  17. Comparison of the oxidation behaviour of WC-Co and WC-Ni-Co-Cr cemented carbides

    Corrosion Science, Vol. 53, Núm. 9, pp. 2754-2760

  18. Compilation of erosion yields of metal-doped carbon materials by deuterium impact from ion beam and low temperature plasma

    Journal of Nuclear Materials

  19. Consolidation of (Ti,Mo)(C,N)-Ni cermets by glass encapsulated hot isostatic pressing

    Materials Science and Engineering A, Vol. 528, Núm. 13-14, pp. 4453-4461

  20. Dependence of the order and crack density of polystyrene opals on volume fraction, humidity and temperature

    Crystal Research and Technology, Vol. 46, Núm. 10, pp. 1044-1050