Publicaciones (65) Publicaciones en las que ha participado algún/a investigador/a

2023

  1. 5G Performance Measurements in Mobility for the Bus Transportation System in an Urban Environment

    IEEE Access, Vol. 11, pp. 127132-127144

  2. A Comparison of Methodologies for Pulmonary Veins Segmentation in High Definition Voltage Maps of Patients with Atrial Fibrillation

    Computing in Cardiology

  3. A Contactless Pirani Approach for Vacuum Monitoring in Vacuum Circuit Breakers

    IEEE Sensors Journal, Vol. 23, Núm. 2, pp. 1592-1600

  4. A D-Band 16-Element Phased-Array Transceiver in 55-nm BiCMOS

    IEEE Transactions on Microwave Theory and Techniques, Vol. 71, Núm. 2, pp. 854-869

  5. A Non-Intrusive Monitoring System on Train Pantographs for the Maintenance of Overhead Contact Lines

    Sensors, Vol. 23, Núm. 18

  6. A Z-source inverter with switched network in the grid-connected applications

    International Journal of Electrical Power and Energy Systems, Vol. 147

  7. A multiscale material model for metallic powder compaction during hot isostatic pressing

    Powder Technology, Vol. 425

  8. About the relationship of the processing conditions, mechanical properties, and microstructure of a co-precipitated Fe/Cu prealloyed powder

    Heliyon, Vol. 9, Núm. 3

  9. Additive Manufacturing of Fe-Mn-Si-Based Shape Memory Alloys: State of the Art, Challenges and Opportunities

    Materials, Vol. 16, Núm. 24

  10. Advanced Multiphase Steels

    Metals

  11. Advances In The Numerical Modelling Of The Close-Coupled Gas Atomisation Process: Optimal Coupling Between Primary And Secondary Atomisation Stages

    Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023

  12. Advances in microscale residual stress measurement using focused ion beam milling and digital image correlation

    Revista española de mecánica de la fractura, Núm. 5, pp. 237-242

  13. Afinidad entre queratosas de lana y distintos iones en fase acuosa analizada mediante sedimentación.

    Afinidad: Revista de química teórica y aplicada, Vol. 80, Núm. 598, pp. 99-110

  14. An elasto-plastic damage-coupled mesoscopic model for cold-drawn eutectoid steels

    Revista española de mecánica de la fractura, Núm. 6, pp. 285-290

  15. An engineered periosteum for efficient delivery of rhBMP-2 and mesenchymal progenitor cells during bone regeneration

    npj Regenerative Medicine, Vol. 8, Núm. 1

  16. Calibration of a Dust Scattering Instrument Using Tomographic Techniques and Its Application to a Dust Sensor Instrument

    Sensors, Vol. 23, Núm. 11

  17. Control method based on real–imaginary decomposition at the switching frequency for multiple active bridge converters

    IET Power Electronics

  18. Densification of WC-Fe-Ni-Co-Cr cemented carbides processed by HIP after sintering: effect of WC powder particle size

    International Journal of Refractory Metals and Hard Materials, Vol. 110

  19. Design and fabrication of a microfluidic system with embedded circular channels for rotary cell culture

    Biotechnology Journal, Vol. 18, Núm. 7

  20. Design of a HTS 2 MW Electric Motor for Single-Aisle Regional Aircraft

    IEEE Access, Vol. 11, pp. 144325-144336