Centro de Estudios e Investigaciones Técnicas de Gipuzkoa-ko ikertzaileekin lankidetzan egindako argitalpenak (106)

2022

  1. A survey on the modelling of air springs–secondary suspension in railway vehicles

    Vehicle System Dynamics, Vol. 60, Núm. 3, pp. 835-864

2021

  1. Experimental study of the influence of operational and geometric variables on the powders produced by close-coupled gas atomisation

    Materials and Design, Vol. 199

  2. Extraction of tool wear indicators in peck-drilling of Inconel 718

    International Journal of Advanced Manufacturing Technology, Vol. 114, Núm. 9-10, pp. 2711-2720

  3. Inclusion of shear rate effects in the kinetics of a discretized population balance model: Application to struvite precipitation

    Water Research, Vol. 200

2020

  1. Custom Elasticity Materials Through Mixing Thermoplastics with Extrusion 3D Printers

    Lecture Notes in Mechanical Engineering

  2. Experimental study of the surface characteristics of electron beam melted Ti-6Al-4V and its improvement

    Euro PM 2018 Congress and Exhibition

  3. Haptic performance using voltage-mode motor control

    IEEE Transactions on Industrial Electronics, Vol. 67, Núm. 1, pp. 698-705

  4. Machine learning for active gravity compensation in robotics: Application to neurological rehabilitation systems

    IEEE Robotics and Automation Magazine, Vol. 27, Núm. 2, pp. 78-86

  5. Model of an elevator system to characterize the influence of the isolator on the vibration transmission

    Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics

  6. On the derivation of air spring model parameters of a passenger rail vehicle suspension based on finite element model

    Proceedings of ISMA 2020 - International Conference on Noise and Vibration Engineering and USD 2020 - International Conference on Uncertainty in Structural Dynamics

  7. Stability analysis and user perception of haptic rendering combining virtual elastic, viscous and inertial effects

    Applied Sciences (Switzerland), Vol. 10, Núm. 24, pp. 1-14

2019

  1. A New Mass-Based Discretized Population Balance Model for Precipitation Processes: Application to Struvite Precipitation

    Water Research, Vol. 155, pp. 26-41

  2. Design and manufacturing of shin pads with multi-material additive manufactured features for football players: A comparison with commercial shin pads

    Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, Vol. 233, Núm. 1, pp. 160-169

  3. Extending the Autonomy of a Battery for Electric Motorcycles

    IEEE Transactions on Vehicular Technology, Vol. 68, Núm. 4, pp. 3294-3305

  4. Implementation of Timoshenko element local deflection for vertical track modelling

    Vehicle System Dynamics, Vol. 57, Núm. 10, pp. 1421-1444

  5. Inferring material properties in robotic bone drilling processes

    Acta of Bioengineering and Biomechanics, Vol. 21, Núm. 3

  6. Quasi-static and dynamic properties of aged natural rubber compounds for transport applications

    Constitutive Models for Rubber XI - Proceedings of the 11th European Conference on Constitutive Models for Rubber, 2019

2018

  1. Controlling two haptically-coupled devices: System modeling and stability analysis

    Mechatronics, Vol. 49, pp. 224-234

  2. Distributed support modelling for vertical track dynamic analysis

    Vehicle System Dynamics, Vol. 56, Núm. 4, pp. 529-552

  3. Modal approach to obtain the coupling loss factors between structural systems and the surrounding fluid

    Applied Acoustics, Vol. 133, pp. 144-156