Artículos (24) Publicaciones en las que ha participado algún/a investigador/a

2003

  1. A comparison of FEM and upper-bound type analysis of equal-channel angular pressing (ECAP)

    Journal of Materials Processing Technology, Vol. 141, Núm. 3, pp. 313-318

  2. APLICACIONES AVANZADAS DEL USO DE TEXTURAS PRECOMPUTADAS EN ENTORNOS DE SIMULACIÓN EN TIEMPO REAL

    Revista Ingeniería Industrial, Núm. 2, pp. 45-58

  3. Analysis of different acicular ferrite microstructures in low-carbon steels by electron backscattered diffraction. Study of their toughness behavior

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 34 A, Núm. 11, pp. 2505-2516

  4. Aspects of orientation-dependent grain growth in extra-low carbon and interstitial-free steels during continuous annealing

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 34, Núm. 13, pp. 827-839

  5. Characterization of interconnect interfacial adhesion by cross-sectional nanoindentation

    International Journal of Fracture, Vol. 120, Núm. 1-2, pp. 421-429

  6. Computer aided design of PM high speed steels for vacuum and nitrogen atmospheres

    Powder Metallurgy, Vol. 46, Núm. 3, pp. 209-218

  7. Dynamic recrystallization behavior covering a wide austenite grain size range in Nb and Nb-Ti microalloyed steels

    Materials Science and Engineering A, Vol. 361, Núm. 1-2, pp. 367-376

  8. Flow stress behaviour, static recrystallisation and precipitation kinetics in a Nb - microalloyed steel after a strain reversal

    Materials Science and Engineering A, Vol. 344, Núm. 1-2, pp. 340-347

  9. Hardness of C, CNx and AlN thin films after rapid thermal annealing

    Materials Chemistry and Physics, Vol. 82, Núm. 2, pp. 452-457

  10. High temperature tensile and fatigue behaviour of the unidirectionally reinforced MMC Ti64/SiC

    Engineering Fracture Mechanics, Vol. 70, Núm. 15, pp. 2137-2148

  11. Interfacial fracture induced by cross-sectional nanoindentation in metal-ceramic thin film structures

    Acta Materialia, Vol. 51, Núm. 14, pp. 4295-4305

  12. Mechanisms of energy absorption in the creep fracture of woven ceramic composites

    Journal of the European Ceramic Society, Vol. 23, Núm. 12, pp. 2039-2046

  13. Metro Bilbao training simulator: The first experience of training novice drivers

    VDI Berichte, pp. 425-434

  14. Microstructure and mechanical properties of carbon steel A210-superalloy Sanicro 28 bimetallic tubes

    Materials Science and Engineering A, Vol. 348, Núm. 1-2, pp. 180-191

  15. Modelling the effect of oxidation on the creep behaviour of fibre-reinforced ceramic matrix composites

    Acta Materialia, Vol. 51, Núm. 13, pp. 3745-3757

  16. Modelo teórico y su contrastación experimental para la predicción del daño térmico en el torneado duro

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 289, pp. 47-53

  17. Oxidaciones avanzadas para el tratamiento de lixiviado: aplicación del Reactivo de Fenton

    Tecnología del agua, Año 23, Núm. 237, pp. 30-37

  18. REALIDAD VIRTUAL PARA EL MANTENIMIENTO DE MOTORES DE AVIÓN

    Revista Ingeniería Industrial, Núm. 2, pp. 19-28

  19. Reduction of false alarm rate in automatic forest fire infrared surveillance systems

    Remote Sensing of Environment, Vol. 86, Núm. 1, pp. 19-29

  20. Residual stresses in tool steel due to hard-turning

    Journal of Applied Crystallography, Vol. 36, Núm. 5, pp. 1135-1143