Publicaciones (45) Publicaciones en las que ha participado algún/a investigador/a

2003

  1. A comparison of FEM and upper-bound type analysis of equal-channel angular pressing (ECAP)

    Journal of Materials Processing Technology, Vol. 141, Núm. 3, pp. 313-318

  2. APLICACIONES AVANZADAS DEL USO DE TEXTURAS PRECOMPUTADAS EN ENTORNOS DE SIMULACIÓN EN TIEMPO REAL

    Revista Ingeniería Industrial, Núm. 2, pp. 45-58

  3. Aerated thermophilic biological treatment with membrane ultrafiltration: Alternative to conventional technologies treating paper mill effluents

    Water Science and Technology: Water Supply

  4. Alloy development and associated dimensional changes of aluminium alloys during liquid phase sintering

    Materials Science Forum

  5. Analysis of different acicular ferrite microstructures in low-carbon steels by electron backscattered diffraction. Study of their toughness behavior

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 34 A, Núm. 11, pp. 2505-2516

  6. Analysis of new pivoting strategy for the LDLT decomposition on a multiprocessor system with distributed memory

    IEE Proceedings: Computers and Digital Techniques

  7. Analysis of voltage measurement techniques for direct torque control of induction motors

    IEMDC 2003 - IEEE International Electric Machines and Drives Conference

  8. Aspects of orientation-dependent grain growth in extra-low carbon and interstitial-free steels during continuous annealing

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 34, Núm. 13, pp. 827-839

  9. Austenite evolution modeling in Nb microalloyed steels during thin slab direct rolling

    Materials Science Forum

  10. Carrier capture times in InGaN/GaN multiple quantum wells

    Physica Status Solidi (B) Basic Research

  11. Characterization of interconnect interfacial adhesion by cross-sectional nanoindentation

    International Journal of Fracture, Vol. 120, Núm. 1-2, pp. 421-429

  12. Computer aided design of PM high speed steels for vacuum and nitrogen atmospheres

    Powder Metallurgy, Vol. 46, Núm. 3, pp. 209-218

  13. Control strategies for positioning of linear induction motor: Tests and discussion

    IEMDC 2003 - IEEE International Electric Machines and Drives Conference

  14. Deformabilidad en caliente de un acero inoxidable dúplex: relación entre daño y mecanismos de deslizamiento en la intercara bajo diferentes secuencias de deformación

    Avances en ciencia y tecnología del acero inoxidable II (Centro de Investigaciones Científicas Isla de la Cartuja), pp. 135-142

  15. Development and verification of a new simulation tool for water quality prediction in the Ebro River

    Progress in Water Resources

  16. Development and verification of a new simulation tool for water quality prediction in the Ebro River

    WATER POLLUTION VII

  17. Dynamic recrystallization behavior covering a wide austenite grain size range in Nb and Nb-Ti microalloyed steels

    Materials Science and Engineering A, Vol. 361, Núm. 1-2, pp. 367-376

  18. Electron microscopy study of microtexture in Cu-Al-Ni shape memory alloys processed by powder metallurgy

    Journal De Physique. IV : JP

  19. Estudio mediante la técnica de microscopía de imagen por orientación, OIM, de la deformación en caliente de un acero inoxidable austenítico

    Avances en ciencia y tecnología del acero inoxidable II (Centro de Investigaciones Científicas Isla de la Cartuja), pp. 211-218

  20. Flow stress behaviour, static recrystallisation and precipitation kinetics in a Nb - microalloyed steel after a strain reversal

    Materials Science and Engineering A, Vol. 344, Núm. 1-2, pp. 340-347